Last Activity:02-25-2014 9:41 AM
Likes Given: 399
320 Likes on 198 Posts
Posted in thread: Why is Austin spaming my PM? on 02-25-2014 at 02:38 PM
To me it is unneeded with the half page ad at the top of the forum. It was not wanted and
unwelcome. Then again not like Private messages are private here anyways.
Posted in thread: Why is Austin spaming my PM? on 02-25-2014 at 12:59 PM
I see the giant add at the top of the screen I don't need pm box clogging spam.Who the hell
wants an ATI stock anyways? They are to me one of the lowest quality stocks out there. I would
put a pine 2x...
Posted in thread: Why is Austin spaming my PM? on 02-25-2014 at 11:42 AM
Who is this and why is he doing this? Mods might want to look into this.
Posted in thread: Annealing brass on 02-21-2014 at 06:37 PM
Hmm, I wonder what that discoloration on the neck and shoulder is. :rolleyes: thought that was
from the polishing with liberal tears. HUH go figure.
Posted in thread: Annealing brass on 02-20-2014 at 09:26 PM
I would suggest you take your brass to a lab for testing. Hard working brass displaces the
grain alignment. If brass never changes why does it eventually fail? By your post it should
last forever? We ...
Posted in thread: Annealing brass on 02-20-2014 at 07:09 PM
Brass is not like any other metal. When you heat brass it returns to its original state. No
matter if it is cooled quickly by dropping in water or if allowed to air cool. Laupa anneals
all it's brass....
Posted in thread: Annealing brass on 02-20-2014 at 11:13 AM
This looks like a pretty nice piece of equipment – I cannot tell in the video, but is it
also spinning the case? Otherwise I would think it would heat one side more than the other.That
is the re...
Posted in thread: Annealing brass on 02-19-2014 at 04:42 PM
Just get one of these. Sure it's $495 but it is the best way to do it. If you want you can have
them drop into a bucket of water or just drop them into a 9x13 or some form of metal can like a
Posted in thread: Can I smooth my rifles action with sandpaper? on 02-18-2014 at 01:15 PM
I wouldn't. Nothing good comes of loosening up a ar15 bolt. You must be extremely careful using
lapping compound to do this stuff. The trigger assembly should be no where near the rifle and
it should ...
Posted in thread: Can I smooth my rifles action with sandpaper? on 02-18-2014 at 01:11 PM
The problem with sandpaper is that it sheds the grit very easy. Emery cloth would be better.
Axx has it right though just use some lapping compound and the bolt or Wheeler Engineering tool
offered at ...