Last Activity:09-13-2016 10:41 AM
1 Likes on 1 Posts
Posted in thread: Photo of a deformed .22 brass case on 09-11-2016 at 12:33 AM
Doc may be on to something. Have you shot any shorts in the gun? If so they can lead the
chamber. This is more common in bolt actions but some Semi-autos can single feed as well. Just
Posted in thread: Photo of a deformed .22 brass case on 09-05-2016 at 05:57 PM
Went and bought another recoil spring assembly. Now the gun shoots and cycles flawlessly!
Tested with CCI minimags, CCI Blazers, and Federal Champion (510). I compared the old with the
new, and found ...
Posted in thread: Photo of a deformed .22 brass case on 09-02-2016 at 01:35 AM
Round fired when bolt was not fully closed (out of battery firing). Try a good cleaning, do not
neglect cleaning under extractor.I thought the same, that maybe it was too dirty on the bolt
face and ou...
Posted in thread: Photo of a deformed .22 brass case on 09-01-2016 at 10:17 PM
Went to the range today and shot my Ruger Standard with some dismal results. I shot 300rds, and
8 failures to eject. Took the gun apart and found nothing. I then looked at the last round that
did not ...
Posted in thread: CCI Minimag question on 12-03-2015 at 12:26 PM
It has been said that CCI Minimags shoot well "accuracy" in just about any make and model of
gun. The question that comes to mind would be, are they talking about the 36gr. or 40gr bullet?
Posted in thread: Almost Over on 07-28-2015 at 12:30 AM
I just can't believe "horders" are buying up .22 ammo that has made it hard to find!!
Everywhere I go, it is behind the counter and you have to ask for it. And then, there is a
"50rd" 2 box limit. Or ...
Posted in thread: Ruger Standard failure to feed ( With Pics ) on 08-14-2013 at 02:27 AM
I have 3 mags. And the problem happens on all three. As for the bolt deforming the next
round.....not so because that same round looks good while still in the magazine. I am quite
sure that the bullet...
Posted in thread: Ruger Standard failure to feed ( With Pics ) on 08-13-2013 at 02:33 PM
I have a PPK/s in .22lr that has similar problems with standard velocity ammo.You did not say
what ammo you are using.How does it do with high velocity ammo?Forgot to mention the ammo!!
This was using...
Posted in thread: Ruger Standard failure to feed ( With Pics ) on 08-13-2013 at 01:59 PM
Failure to feed issue that happens at least 1-2 times with a 9 round magazine. I load the 9
round mag and install the mag into the gun, pulling back on the bolt ears, let it snap back to
load the firs...
Posted in thread: Ruger MK l Standard Extraction Issues on 09-11-2012 at 08:12 PM
Went to the range today and had some disappointing results! I was shooting Federal Champion
510s, and could not go through a clip without a problem. Ejection problems to say the least.