VIEW MY

ECPunk

Gift Premium Subscription To ECPunk

Join Date:

04-04-2013

Last Activity:

08-27-2016 7:51 AM

Likes Given: 2

2 Likes on 2 Posts 

    ABOUT ME

  • Rhode Island
  • Hockey, Baseball, Jeeps, Hiking, Camping, snowboarding
  • ATC Specialist

LATEST ACTIVITY

  • Posted in thread: loading 5.56/.223 with my dillon 650 on 08-27-2016 at 11:51 AM
    Thanks Locuts. I will use my Dillon crimp die for a while but maybe in the future I will
    purchase the LFC die and try that one as well. The LFC is inexpensive anyhow. One more
    question: If the factory...

  • Posted in thread: Primary arms 1-6x on 08-25-2016 at 09:15 PM
    to the OP, what did you finally purchase? I have been comparing the PA 1-6x with the Vortex
    1-6x for some time and have not made a move yet. I wonder what you have done and do you like
    your purchase? ...

  • Posted in thread: loading 5.56/.223 with my dillon 650 on 08-25-2016 at 06:47 PM
    Couple things you have incorrect.You do not need lube on your cases for any other die but the
    sizing die. After sizing the lube can be removed or not it is up to you. Your brass will not
    get stuck in ...

  • Posted in thread: Primer hardness question on 08-25-2016 at 02:13 AM
    I've never had a hardness problem, ever. Please don't spread misinformation trying to defame me
    or my personal life. If you continue such nonsense, I willWaaaaiiitt a minute, never mind.Carry
    on.:DNic...

  • Posted in thread: loading 5.56/.223 with my dillon 650 on 08-25-2016 at 12:59 AM
    its was mentioned above about cleaning the lube or failing to do so after resizing... if i were
    to fully utilize the 650 progressive process I wouldn't want to remove the lube until after the
    cartridg...

  • Posted in thread: loading 5.56/.223 with my dillon 650 on 08-24-2016 at 02:28 AM
    Thanks for the reply Dallas. My focus will be range shooting, maybe match competitions if I
    ever get good enough. Also, I may take some tactical/home defense courses for handgun and m4
    training. These...

  • Posted in thread: loading 5.56/.223 with my dillon 650 on 08-24-2016 at 01:03 AM
    Hi guys,I purchased this 650 about two years ago but never really had time to get into
    reloading until now. I have set the press up and the dies are set up but I have some questions
    and concerns. mayb...

  • Posted in thread: Cheap Tips and Tricks For Dillon 550B and XL650s on 08-04-2016 at 12:22 AM
    Nice post Steve. I am new to reloading and have purchased the XL650 setup. I may use some of
    your adaptations.

  • Posted in thread: New from RI on 04-11-2013 at 02:38 PM
    Thanks everyone! Great forum so far.

  • Posted in thread: Is This a good brand? on 04-08-2013 at 02:06 AM
    The EOTech Magnifier is a good idea! But what is wrong with your present EOTech. It has a 1 MOA
    Reticle and can be used very effectively at 300 yards. You can use the 1 MOA Reticle to range
    and adjust...

FORUM SIGNATURE
Erik A weapons ban only keeps guns out of the hands of law abiding citizens. Evil doers will always find a weapon.
0 COMMENTS
POST A COMMENT