VIEW MY

drewk256

Gift Premium Subscription To drewk256

Join Date:

03-04-2012

Last Activity:

12-28-2014 1:02 PM

2 Likes on 1 Posts 

LATEST ACTIVITY

  • Posted in thread: Two stage triggers on 09-30-2014 at 03:41 AM
    I was doing some thinking on putting a two stage competition trigger in my ar. Some of the ones
    that I have seen say they go from a 3lb to 2lb. Does having a two stage trigger make my
    selector have th...

  • Posted in thread: AR Pistol Questions on 07-16-2014 at 05:55 AM
    Realigned the gas tube. Replaced the extractor and spring and it seems to be working fine. Will
    update further if issue continues.

  • Posted in thread: AR Pistol Questions on 07-07-2014 at 02:33 AM
    No I just single fired it for 4-5 rounds then just rapid fired about 8 after that. It didn't
    start double feeding till about 10 shots later. Will work good if you stay slow but when you
    try to rapid f...

  • Posted in thread: AR Pistol Questions on 07-07-2014 at 02:14 AM
    Went to the range today. Realigned the gas block and it ran ok. I was able to rapid fire about
    8 rounds without a double feed. I did put the bolt in another AR and it ran perfect, so it's
    not the bolt...

  • Posted in thread: AR Pistol Questions on 07-01-2014 at 04:22 AM
    I will realign the gas block tomorrow. And get back with whoever replies in the morning. Thanks
    for the help thus far. Maybe will get this fixed. I will be going Sunday to do some more
    testing so I'll...

  • Posted in thread: AR Pistol Questions on 07-01-2014 at 04:18 AM
    see the link to align the block. Just because the tube is off center or centered doesnt mean
    the block is correct. Its just an indicator its not right. Its possible the tube is bent but
    not liekly. Mi...

  • Posted in thread: AR Pistol Questions on 07-01-2014 at 03:51 AM
    Ok my gas block doesn't have an adjustment that I can see. Just what looks like push pins
    holding the gas tube in place. I have adjusted the gas block and even thought it looks like
    it's to the left t...

  • Posted in thread: AR Pistol Questions on 07-01-2014 at 02:52 AM
    146169Here is a picture of the chamber.

  • Posted in thread: AR Pistol Questions on 07-01-2014 at 02:49 AM
    146166146167146168Yes I have broken it all the way down and cleaned it. Still was doing the
    same thing. Do you think it could be running to fast and a heavier buffer and buffer spring
    would help. And ...

  • Posted in thread: AR Pistol Questions on 07-01-2014 at 01:31 AM
    I recently traded an AR rifle for an AR pistol. It was a few weeks before I was able to go fire
    it. The pistol would only cycle a one or two rounds before it would double feed. It wasn't
    ejecting the ...

0 COMMENTS
POST A COMMENT