Last Activity:09-28-2016 3:11 AM
Likes Given: 4
12 Likes on 9 Posts
Posted in thread: Ruger Redhawk in .357 on 08-26-2016 at 03:50 PM
Since you are loading your own, give this a try. Get the 180gr Hornady XTP and seat it at the
lower cannelure. Overall length will be +.121" and should come out at approx. 1.69"-1.70".
Posted in thread: Does it really matter? on 07-22-2016 at 09:50 AM
The perfect firearm? No such thing. The perfect ammo however is a different story. Ideally you
want the ammo that is the most accurate in your weapon, and then you look at bullet type and
Posted in thread: Mystery the disappearing Load data and wimping out of loads on 07-02-2016 at 09:23 PM
158gr at 1500fps? Look here... These loads are fired from M27 and L-frame S&W, Ruger GP100's
and .357 Redhawks. Smaller frame weapons should NOT be used.
Posted in thread: Mystery the disappearing Load data and wimping out of loads on 06-27-2016 at 04:14 PM
SAAMI did not lower anything. They changed the way they measured pressure , note SAAMI tested
velocities are identical for the change in pressure testing techniques . Identical velocities
Posted in thread: Mystery the disappearing Load data and wimping out of loads on 06-26-2016 at 07:55 AM
AA changes data when they change powder manufacturers.Perhaps, but in this case Accurate
lowered that maximum powder charge to meet the new SAAMI standard of 35 kpsi. In the past,
Accurate was known f...
Posted in thread: Mystery the disappearing Load data and wimping out of loads on 06-19-2016 at 12:05 PM
Accurate Arms V322 vs. V3.5 load data for .357 Mag with 158gr XTP and AA#9:V3.5 starting load:
12.4gr; max. load: 13.8gr @35,022 psiV322 starting load: 13.5gr; max. load: 15.0gr @ 44,900
cupNote that ...
Posted in thread: Misleading ad on Gun Broker what to do? on 06-15-2016 at 04:11 AM
Open a support issue with Gunbroker. They DO require that the item pictured be the one sold.
Only open ONE issue with them.They do? Then how do sellers get away with using stock photos
from the manufa...
Posted in thread: .41 special on 05-14-2016 at 04:16 PM
Clements does a .41 Special conversion of the GP100.
Posted in thread: Full House .357 Magnum on 04-02-2016 at 11:20 PM
Original Remington 125gr SJHP loads can be duplicated using AA-4100/Ramshot Enforcer (same
powder). This is a very clean burning powder. Just use the old CUP AA#9 load data.
Posted in thread: 32 Remington Brass or Bullets on 10-12-2015 at 02:37 AM