VIEW MY

Chesterton77

Gift Premium Subscription To Chesterton77

Join Date:

05-26-2013

Last Activity:

11-25-2013 10:15 PM

LATEST ACTIVITY

  • Posted in thread: Winchester Model 37 on 08-01-2013 at 10:27 PM
    I used my finger once and it didn't feel very good. Thanks for the tip about using a piece of
    wood.

  • Posted in thread: Winchester Model 37 on 07-30-2013 at 07:48 PM
    Does the hammer fall, but it does not fire?I would suspect firing pin.Exactly - hammer is in
    good shape, but nothing happens. You are probably right - I'm going to pull it apart and see
    what I find. I...

  • Posted in thread: Winchester Model 37 on 07-30-2013 at 06:58 PM
    Anyone have experience with a Winchester Model 37 scattergun? I have one that has ceased firing
    - just goes 'click.' I'm figuring either a broken firing pin or a headspace problem. Any
    thoughts?

  • Posted in thread: Excellent, Fast Shotgun Barrel Threading & Choke Vendor on 07-30-2013 at 06:55 PM
    Hello allWanted to share an excellent gunsmith with you for threading fixed choke shotgun
    barrels and supplying screw in chokes. I had my 12-gauge Hawk barrel threaded and got three
    extended, threaded...

  • Posted in thread: vaquero project - which punches should I use? on 07-14-2013 at 06:15 AM
    Thanks for the help - good information.

  • Posted in thread: vaquero project - which punches should I use? on 07-13-2013 at 11:58 PM
    I am pretty new to this forum, so forgive me if this has already been discussed. My
    Father-In-Law has asked if I can do some minor work to his Vaquero - replace the broken
    transfer bar. Anything speci...

  • Posted in thread: Savage Model 4C bolt on 05-27-2013 at 01:24 AM
    Thanks, C3Shooter. I'm going to buy the schematic from Numrich. Also, a picture is attached.

  • Posted in thread: The New Guy on 05-27-2013 at 01:04 AM
    Just joined yesterday. I'm a father of 5 living in Tacoma, WA. I love to shoot, reload, and am
    active in my church. I'm getting interested in hobby gunsmithing and am really looking to learn
    from ever...

  • Posted in thread: Savage Model 4C bolt on 05-26-2013 at 05:53 AM
    I'm new to the forum, so let me know if this has already been discussed. I am trying to restore
    a Savage Model 4C (just a slight revision from the original model 4) and need to get the bolt
    apart. I h...

0 COMMENTS
POST A COMMENT