VIEW MY

BrandonB

Gift Premium Subscription To BrandonB

Join Date:

11-03-2012

Last Activity:

01-13-2013 5:14 PM

LATEST ACTIVITY

  • Posted in thread: M&P 40 troubleshooting on 11-04-2012 at 04:33 AM
    Just wanted to let everyone know I found the problem on the gun the spring in front of the
    firing pin was bent and blocking the firing pin from following all the way through I fixed the
    spring and now...

  • Posted in thread: M&P 40 troubleshooting on 11-04-2012 at 01:13 AM
    Thanks for the input

  • Posted in thread: M&P 40 troubleshooting on 11-04-2012 at 12:57 AM
    Earlier it wasn't striking when I took the slide off I worked the firing pin by hand at first
    it was very tight it has loosened up some and now it leaving a dent in the primer. So I would
    guess a firi...

  • Posted in thread: M&P 40 troubleshooting on 11-04-2012 at 12:49 AM
    I didn't take it apart I just took the slide off the action to see if it had any ware

  • Posted in thread: M&P 40 troubleshooting on 11-04-2012 at 12:45 AM
    I just tried it again and it is leaving a small indignation in the primer

  • Posted in thread: M&P 40 troubleshooting on 11-04-2012 at 12:42 AM
    Yes and it came from a gun show

  • Posted in thread: M&P 40 troubleshooting on 11-04-2012 at 12:10 AM
    No strikes

  • Posted in thread: M&P 40 troubleshooting on 11-03-2012 at 11:59 PM
    It is slightly used

  • Posted in thread: M&P 40 troubleshooting on 11-03-2012 at 10:37 PM
    I just got a M&P 40 and can not get it to fire. The firing pin spring seems weak does anyone
    know what might be going on.

0 COMMENTS
POST A COMMENT