Last Activity:12-19-2012 2:15 AM
Posted in thread: Need help troubleshooting on 11-30-2010 at 07:26 AM
Thanks for your help everyone. I put 60 rounds through it this afternoon without a single
problem. I think I just needed to get it broken in. Again, thanks for all your help. I know I
can always turn ...
Posted in thread: Need help troubleshooting on 11-27-2010 at 06:24 AM
Feels fine when I cycle it by hand. I got everything lubed up really well now. I'm pretty sure
it just needs to be broken in now. It's doing a LOT better than it was. I was only able to fire
Posted in thread: Need help troubleshooting on 11-27-2010 at 05:12 AM
Thanks for your help guys. I pretty much have it working. I lubed the hell out if last night
and I was able to shoot half a mag today with no problems but then the bolt got stuck all the
way to the re...
Posted in thread: Need help troubleshooting on 11-25-2010 at 01:49 AM
Yeah but the first round fired was brass cased and it did the same thing. Also it comes out of
the chamber after it's fired, so it's not actually stuck in there until I push the forward
Posted in thread: Need help troubleshooting on 11-25-2010 at 12:25 AM
I used some russian steel cased ammo but I also used some brass cased ammo, not sure what
brand. I've never heard of polymer coated ammo so I don't think I did that. The extractor looks
fine, as does ...
Posted in thread: Need help troubleshooting on 11-24-2010 at 10:52 PM
Alright I have a problem with the AR-15 I built so I'm going to try to describe the problem and
hopefully someone can help me out.I got the headspace checked and it was fine so I took it home
Posted in thread: Looking for a rifle for my dad for Christmas on 11-20-2010 at 04:40 AM
So I'm looking for a deer rifle to buy for my dad for Christmas. He wants it to be chambered in
.270 or .30-06. I'm going to try to find a good used one on gunbroker. The budget is between
Posted in thread: My AR-15's on 11-11-2010 at 07:12 AM
If nothing else, you could probably sell the lower on gunbroker for more than $20.
Posted in thread: AR Lowers: Minimum on 11-07-2010 at 02:42 AM
Here is the one I got. Works fine...Surplus Arms & Ammo LOW15 Stripped AR Lower Receiver
Posted in thread: Where to get cheap 1911 scales? on 10-31-2010 at 06:35 PM
I used to do woodturning and got a bit too excited buying my wood supply. So you can relate, it
is like ammo stockpiling only with so much more choices and you cannot just have a piece of