Last Activity:07-25-2014 1:42 PM
Likes Given: 1
39 Likes on 32 Posts
Posted in thread: Hornady Progressive Press versus Dillon 650 on 07-24-2014 at 10:06 PM
Sine I have had a Dillon XL650 for 7 years now, I decided to do a random sample about 6 months
ago comparing at that time current prices found on the internet and found that the prices are
Posted in thread: LC9 Trigger update on 07-16-2014 at 07:35 PM
I was doing the same thing, but I found 2 things I was doing. First, even though the pull is
long, I was taking way too long to pull the trigger. I would have a lot of "wobble" and lose my
sight on th...
Posted in thread: LC9 Trigger update on 07-12-2014 at 09:05 PM
After you replace the up grades with the originals try shooting again. Could you be just
pulling it low? At 4 Yards(12 ft) I can put any rounds anywhere on target. Your experienced so
I don't think yo...
Posted in thread: LC9 Trigger update on 07-11-2014 at 09:52 PM
Sadly I have to report a problem with my LC9. When I first got it, I had a difficult time
getting it on paper @ 10'. I really thought because of the long trigger pull, was forcing me to
hold the gun d...
Posted in thread: Reloading Costs. on 07-04-2014 at 08:49 PM
Comments about 9mm. Unless you shoot a very small amount of this caliber, you can save at least
$.50 on every Dollar reloading this round. At todays components prices and assuming you have
the brass, ...
Posted in thread: Reloading Costs. on 07-04-2014 at 08:34 PM
Yep - I understand now. One Caliber for everything. Works for me !!!It's very simple, really.
In a good bolt-action, you can shoot a variety of loads from a 30.06 cartridge. For varmints,
if you load ...
Posted in thread: Reloading Costs. on 07-03-2014 at 12:16 AM
This is providing of course that the projectile will group in the 30/06 but you'll never know
till you try a few test loads and reloading gives you that opportunity.2 things about
Posted in thread: Reloading Costs. on 07-03-2014 at 12:11 AM
"Return On Investment"Thank you Therewolf :)
Posted in thread: Reloading Costs. on 07-02-2014 at 11:24 PM
curious about the ROI. What r u curious about. "the time ?" or "the equipment selection ?".As a
new reloader, there were alot of costs, such as the equipment (and yes we could of bought
Posted in thread: LC9 Trigger update on 07-02-2014 at 10:46 PM
I didn't do the Galloway YET,. I had my Ruger Certified Smith clean it up a bit,..It's Much
Better then it was out of the Box,..plus mine is Broken in now,..close to 1500 Rds. on it in
just over 2 Yea...