AmericanArmsEngineering

LATEST ACTIVITY

• Posted in thread: It`s been a while since A.A.E. Gunsmiths have Visted here. on 08-14-2012 at 03:46 AM
  Hello all it has more than a year since We ventured back to this board, Not that we were
  ignoring you! But so damn busy at the bench (which is a good thing!)We have been slammed with
  our Cerakote serv...

• Posted in thread: M240b on 07-23-2011 at 05:36 PM
  Well by all mean CONGRATS!First and foremost always keep that girl cleaned and oiled and she
  will serve you well! And keep tabs on that spare barrel!Military Grade Services

• Posted in thread: MAC Rail System on 07-16-2011 at 03:31 PM
  As of yet I have not seen a rail system offered for this brand. That is not to say that we can
  not create one for you. Send us an email if you wish to pursue this venture.

• Posted in thread: Cz 712 semi auto shotgun on 07-15-2011 at 09:16 PM
  You have to decide for your self what the purpose for this shotgun is? This shotgun will be
  fine if you are the occasional hunter. But if sport shooting like Trap or skeet where you will
  be pounding 2...

• Posted in thread: A-5 Trigger Problem on 07-15-2011 at 09:04 PM
  It maybe an inexpensive part but it is deep in the trigger assembly. If you attempt this
  yourself you should have a diagram on hand for reference if you are not familiar with the
  design. Also have the...

• Posted in thread: A-5 Trigger Problem on 07-15-2011 at 05:58 PM
  Sure sounds like the trigger return spring to me

• Posted in thread: Rem 700 firing pin protrusion on 06-04-2010 at 10:39 PM
  To do it right just replace the pin. But if your in an emergency situation than once you remove
  the pin you will see the sear contact area you must relieve, do not remove to much because this
  will put...