Last Activity:05-03-2013 3:02 AM
Posted in thread: Cutting top slide serrations in a 1911 on 11-20-2012 at 07:58 PM
Yea sort of only without the cross checkeringMore like this
Posted in thread: Cutting top slide serrations in a 1911 on 11-20-2012 at 06:55 PM
I am getting ready to do a project on a commander 1911 I have and 2 of the things I want to do
are: 1. cut fine line serration in the top of the slide (yes I have a mill) 2. I want to cut
some off of ...
Posted in thread: Nighthawk bobtail on 02-22-2010 at 11:41 PM
beautiful gun.It's jewelry that shoots !!
Posted in thread: 9mm vs 45 cal on 02-21-2010 at 12:42 PM
I don't necessarily feel that way. the Hi Power's or most other guns in general don't feel and
shoot for me as well as a good 1911.I have 2 9mm's, 1 10mm with one more on order and a .460
rowland in t...
Posted in thread: 9mm vs 45 cal on 02-21-2010 at 10:50 AM
I have 2 9mm 1911's the springs are lighter than 45. I run a 15 lb in my 5" 9 vs either stock
16lb or my prefered 18.5 in the 45.sThe Kimber AGEIS Pro (commander size) 9mm that I have I am
not sure wh...
Posted in thread: 10mm loads on 02-19-2010 at 07:39 PM
I took it to the range the other day with 108's on top of Longshot and #7 loads. The #7 were
more accurate. I think I am going to follow up with the #7 a little more.Thanks for the tip on
Posted in thread: Kimber tactical pro II on 02-18-2010 at 01:33 PM
I did it myself. It wasn't to hard, small learning curve and had to buy a jig to relocate the
MSH pin hole.Also had to refinish it afterwords.Stainless is nice because you can just polish
it up afterw...
Posted in thread: Gonna pull the trigger today on 02-17-2010 at 03:40 PM
So to speak, I am ordering a 10mm Stainless Commander Kit from Fusion Firearms. Fusion Firearms
Woot :) They don't have the Stainless kits listed on their website but they are available.I
have done 2 ...
Posted in thread: Kimber tactical pro II on 02-17-2010 at 03:34 PM
The Tac Pro II is what I use for a carry gun.I really Like it a lot. But I made a couple of
changes.I removed the Magwell and bobtailed the frame. I have thin Alumi grips on it now. not
whats in the p...
Posted in thread: New from Indiana on 02-15-2010 at 03:23 PM
Yea I will have a chance to post more as the weather improves.My wife and I own a body shop and
it is snowy where we are, so busy time for me