Gift Premium Subscription To Scorpion

Join Date:


Last Activity:

03-04-2016 3:29 AM

Likes Given: 19

3 Likes on 3 Posts 


  • St. Louis, Missouri


  • Posted in thread: AR 15 Which One? on 12-08-2012 at 01:27 PM
    If you get the Colt, you will not need to ream the chamber; all Colt ARs are chambered for
    5.56.Get the Colt.

  • Posted in thread: Ak47 or M4A1 on 12-07-2012 at 12:51 AM
    AK: Simple, robust design. I'm not a fan of the sighting system, nor of the AKM stock; when I
    shoot, I prefer to get a good cheek weld so that I can look through the sights. The rifle's
    ergonomics can...

  • Posted in thread: AR 15 parts from - Blackthornproducts on 12-05-2012 at 12:42 PM
    SSGN - already been through that, his BCG (and lower) fired on another rifle. On a video he
    posted, it will fire once, pick up the next round, and then not fire. There will be a primer
    indentation, th...

  • Posted in thread: AR15 problems please Help on 12-03-2012 at 10:18 PM
    I figured as much, and I'm almost certain that the buffer currently in yours is a regular
    carbine buffer.It can be a little complicated to get a 20" barreled upper working with a
    carbine lower. Make S...

  • Posted in thread: Is it really worth buying a colt ar15? on 12-02-2012 at 10:19 PM
    You can build one to your specs for less, but better? Quantify better.

  • Posted in thread: Is carrying concealed extra mags worth it? on 12-02-2012 at 07:22 PM
    Carrying at least one reload is worth it, if only for the fact that you might have to remedy a
    malfunction.As noted earlier, bad guys often travel in groups. Better to have more than enough
    to give th...

  • Posted in thread: What weapon do u conceal!!!!! on 12-02-2012 at 07:05 PM
    Smith & Wesson M&P9 FS, 1-3 reloadsSmith & Wesson 442 .38 Special +P, two reloadsOn occasion,
    an AR in the trunk.

  • Posted in thread: AR15 problems please Help on 12-02-2012 at 02:04 AM
    What kind of stock did you have on the rifle at first?It is now established that it most likely
    isn't your BCG causing the issue. I'm thinking you just need to put a full rifle stock (or an
    A5 stock) ...

  • Posted in thread: Ak stamped receiver on 12-02-2012 at 12:41 AM
    RPKs use 1.5mm thick stamped steel receivers, and are the most durable. Some Chinese and
    Yugoslavian rifles also use these receivers.

  • Posted in thread: AR15 problems please Help on 12-01-2012 at 11:37 PM
    So you have primer indentations, but it isn't firing.What kind of ammo are you shooting?Try a
    different bolt carrier group or try another firing pin in that bolt group.Try a different lower
    receiver (...