Last Activity:10-27-2013 9:29 AM
Likes Given: 19
33 Likes on 23 Posts
Posted in thread: long distance opinions on 10-27-2013 at 03:22 PM
So what's your setup? And what are the inexpensive optics you speak of?My rifle is a Savage
10FLP, which is simply the left-handed version of the 10FP. The scope is a Bushnell Banner 6x18
in 50mm. It ...
Posted in thread: long distance opinions on 10-21-2013 at 01:52 PM
I think whatever works for you is fine. It is your money and your rifle. Simply spending a lot
of money doesn't insure accuracy. I have seen time and time again where long-range accuracy can
Posted in thread: Powder Availability on 09-24-2013 at 01:33 PM
Have any of you been able to get your hands on powder lately? I am really starting to get
concerned after seeing bare shelves for so long. I have talked with reps at Cabela's,
Sportsman's Warehouse an...
Posted in thread: M1Areloading (308/7.62) on 07-18-2013 at 10:05 PM
You can't go wrong with 42.0 IMR4895, 41.5 IMR4064, 43.0 Varget or 39.5 IMR3031. I shoot these
loads in my NM M1A a lot with great results.
Posted in thread: Pet 308/168 BTHP loads? on 07-18-2013 at 10:03 PM
I use this bullet in my loads for both my NM M1A and Savage bolt-action rifle. My pet loads are
41.5 grains of IMR4064, 42.0 grains of IMR 4895, 43.0 grains of Varget and 39.5 grains of IMR
3031. All ...
Posted in thread: starline Brass cracking on 07-09-2013 at 06:18 PM
I have been using Starline bras for my .44 mag loads. I shoot them through a Super Blackhawk
with a 7.5-inch barrel. I have been using H110, 296 and Lil Gun powder in these loads. I
usually load in th...
Posted in thread: Anyone running into Reload supply shortage? on 07-09-2013 at 06:10 PM
I have not been able to buy 230-grain RN bullets for my .45 cap loading or H4350 powder for my
.270 and .243 loads. I have been trying to get these items for months.
Posted in thread: M1A/M-14 dissasembly on 06-20-2013 at 02:07 PM
If you have a Match grade it's in tight. Turn it over, and holding the receiver and barrel tap
the end of the stock at the butt plate on a solid but padded surface.I have a match grade M1A
and this is...
Posted in thread: What length for 308 on 06-16-2013 at 11:30 PM
All of my .308 brass is trimmed to 2.015 and loaded with an OAL of 2.80. I shoot the loads I
make in both my NM M1A and Savage bolt-action rifle with very good results.
Posted in thread: Need a recipe for 45 ACP on 06-16-2013 at 11:28 PM
6.0 grains of Unique is a good load and safe to use with plated bullets.