Last Activity:07-24-2016 10:22 AM
Likes Given: 13
281 Likes on 160 Posts
Posted in thread: Having a bad experience: What is a reasonable turn around time for gunsmithin... on 07-10-2016 at 03:13 PM
Have someone else shoot your gun. Maybe several someones. It looks like you are pulling
low/left with the 3"gun, and a bit left with your control gun. Not implying anything negative
about your shootin...
Posted in thread: Carcano 6.5 on 05-07-2016 at 09:30 PM
[QUOTE=Rex in OTZ;1790548 The M91 Carcano was initially chambered for the M1891 6.5x52mm
cartridge, the very first small-caliber smokeless cartridge adopted by any of the major
Posted in thread: Do you do rechambering? on 05-05-2016 at 12:39 PM
Wow. Didn't know a ball end mill or a dull drill-bit was an effective chambering reamer. Could
havesaved myself a lot of money. What's your reamer look like now?
Posted in thread: light weight vs middle/heavy weight barrel on 04-07-2016 at 02:00 AM
If you are going to put a can on it. go with a short stiff mid-weight barrel with a mid or
rifle length gas system.I would get a 1-7 twist----if you want quiet then sub-sonic ammo is the
ticket, and t...
Posted in thread: Help Type 99 Long Rifle on 04-06-2016 at 12:31 PM
Here is another reference on markings:
Posted in thread: I am finally retired on 04-03-2016 at 09:54 PM
I had a plan in my youth ! I got married , became Father and had another plan ! I then had
catastrophic health issues , another plan ! Then when I thought all was behind me , you guessed
, another pla...
Posted in thread: Switzerland's 2nd Amendment on 04-03-2016 at 09:16 PM
They have Germany as a neighbor, so they know they can be invaded, and become the next German
slave state.That seems like a pretty good reason to be armed to the teeth.Hitler wasn't stupid
enough to m...
Posted in thread: Form 4473 Question 11b. Help!! on 03-06-2016 at 03:55 PM
Just curious------How do you "get a felony charge" and be "out on bail" and not know what you
were charged with? Interesting reply to micro----guessing C3 will be along in a bit to discuss
Posted in thread: Form 4473 Question 11b. Help!! on 03-04-2016 at 12:44 PM
Ask your lawyer.
Posted in thread: What am I missing? Collet crimps on 02-24-2016 at 03:28 AM
What you are describing with your 7/8 bolt is basically a roll crimp. It would affect just the
top of the brass.The collet in the collet crimp die squeezes the whole neck area from all
sides. You have...