Last Activity:10-28-2014 6:22 PM
Likes Given: 1
Posted in thread: WTS: Chinese AK Milled receiver + Polytech Barrel on 10-26-2014 at 01:48 AM
Due to various reasons I have lost interest in this build (Mostly lack of access to
tools/space, and a trigger guard). Originally I bought the receiver for $414 shipped from CNC
warrior and barrel for...
Posted in thread: AK-47 Parts and Kit on 08-25-2013 at 07:10 PM
First off is an excellent shape Romy G kit dated 1986, all matching, no rust, and little to no
wear on the bolt face and barrel breech face. Parts are all matching right down to the
handguard. Kit loo...
Posted in thread: WTS: Chinese Type 59 Makarov on 07-01-2013 at 06:58 PM
For sale is a 1990s imported (By Beta Arms) Norinco Type 59 Makarov. It's in good shape and has
about 95% bluing, comes with one magazine. Asking $450 shipped to your FFL. Located in North
Posted in thread: Brass Trader on 06-25-2013 at 02:26 PM
Have 50-100 some pieces of 5.56 brass and a never used RCBS 5.56 die. New IMI 7.62 x 39 Fired
and cleaned 40 S&W, mixed head stamp.IMI 7.62x39 brass how much do you have?
Posted in thread: Pistol Smithing? on 11-17-2012 at 12:03 AM
I already own an RK-59, Bulgarian Makarov, and a Cz 82. The whole thing is more or less based
around a bet with a close friend of mine which originated from fixing up a barrel-less Luger
Posted in thread: Pistol Smithing? on 11-16-2012 at 07:52 PM
Most of what they said is correct. Axxe explained what they where wrong onGood to get a second
and seventeenth opinion as always, thanks guys. PM coming your way, Marlinman.
Posted in thread: Pistol Smithing? on 11-16-2012 at 07:48 PM
Converting a standard 9 to another of the 9mm is always a better idea.Pardon my ignorance on
the subject. My first choice was a compact Tanfoglio in 9x19 but one of the guys I went to see
Posted in thread: Pistol Smithing? on 11-16-2012 at 07:42 PM
It'd work but 15% reduced hand loads would be betterHmm, I would use a 9x19 platform but I'm
worried about extraction issues on that and chose a .380 since the breech face could be opened
up. Do you t...
Posted in thread: Pistol Smithing? on 11-16-2012 at 07:38 PM
Fair enough, what about with 10% reduced loads however ?
Posted in thread: Pistol Smithing? on 11-16-2012 at 07:36 PM
Last I checked, it should be perfectly safe. Figure out your cartridge data compared to 9x18