Firearm & Gun Forum - FireArmsTalk.com
> Search Results
Go to Page...
Showing results 1 to 10 of 10
Posts Made By:
01-22-2013, 01:19 PM
I've built the two 1911s but I still dont know...
I've built the two 1911s but I still dont know enough about'em to offer an opinion on preference between single and double stack magazines. What I want to mention is that at present there is high...
Blackpowder & Musket
10-21-2012, 11:51 AM
I recently built a Maynard carbine and used a...
I recently built a Maynard carbine and used a musket nipple that proved problematic in that musket caps were difficult to find..Finally I ordered a 1000 CCI musket caps which was a mistake..The CCI...
10-18-2012, 12:50 PM
brokengunguy Go for it, if its a real high...
brokengunguy Go for it, if its a real high priority for you then you will pull it off.. Gunsmithing is satisfying hobby for the person who already owns metalsworking machinery..There no shortage of...
10-15-2012, 12:46 PM
I built a 1911 from castings I bought from Sarco. The slide casting was quite a lot of work to machine it prior to use- much more work than the frame that just required milling the rails and drilling...
03-18-2012, 04:12 PM
I started reloading just about 3 weeks ago..I've...
I started reloading just about 3 weeks ago..I've spent over $1100.00 so far and I been buying the cheapest of everything..Still a whole lot more stuff to buy yet. Aint a cheap proposition when...
03-18-2012, 10:15 AM
Building my shops workbench
I see youre an Arkansan like me.. I might suggest...
I see youre an Arkansan like me.. I might suggest that you stop by the Arkansas dept of Purchasing and Redistribution on Young street in Little Rock on wednesdays..They open to the public for a sale...
03-18-2012, 12:54 AM
I am currently building myself a Winchester 1873...
I am currently building myself a Winchester 1873 in .45 colt,another in .44-40, a third in .32-20 and 4th in .22 LR ..Started with empty receivers and lower tang and making all the other pieces. Few...
02-18-2012, 12:07 AM
I was a couple keystrokes away from buying a pair...
I was a couple keystrokes away from buying a pair of those in .45 Colt..They are not given the better finish of the higher by twice priced models. Would have required a lot of hand finishing to...
01-18-2012, 03:18 PM
Anyone ever made their own gun?
And then talking older guns
Mostly I have built singleshot .22s as in Stevens Favorites , Stevens Marksmans, Stevens model 44 and 1/2s and Winchester model 1885 high or low wall...All old designs.. I am entirely about 100plus...
09-18-2011, 12:09 AM
Wanting to become a gunsmith
This subject interests me.. I would have enjoyed...
This subject interests me.. I would have enjoyed going to school for gunsmithing.. I am machinist and have built more than a couple guns from barstock over the last 6 years or so...Gunsmithing is a...
Showing results 1 to 10 of 10
Gun Classifieds - GunsXchange
Glow-On Super Phosphorescent
Old West Lawmans Forgotten Memoir
Pennies 4 Guns
The CGA Company
HIGH DEFINITION HYDROGRAPHICS
Pocket Solutions, Inc.
Achtung T Shirt LLC
Rifles Only, Inc
Beneficial Products, Inc.
Just Right Carbines LLC
Mil Spec Depot
Rimrock Firearms & Big Cat STicker Shack
Common Sense Cases
Shark Coast Tactical
Strike Hard Gear
Trek Marketing, LLC
Nesbit Guns -UsedGunsPA.com
Twisted Monkey Customs
National Rifle Association
Argyle Armoring, LLC
UP Ammo Supply
MaddMacs Precision Tactical
West Fork Armory LLC
Critical Survival LLC
dh custom work
HLF Manufacturing, LLC
3 Speed Holster
Gun Mouse Bore Cleaner
Mossberg 500 problems
Another new member
Real iron sight
Random Thoughts Thread
2nd FTF Shotgun Shoot & Hoot, Vanzant, Mo. OCT 5, 13
Greetings from FL
reloading equipment complaint
Just when it was starting to get better
world famous bobski mystery thing, pic #257
How to "Ghost Load" or "Carrier Load" or "Float a Round" a Shotgun
Who wants a 3rd ftf shoot and hoot this year?
H&R 686 magnum cylinder
Selling all at my cost! Don't pass this up!
Magpul Pmags / Rebuild KIts
Night Vision Scope III Gen.
$500.00 or trades
FOLLOW US ON
Copyright © Group Builder, Inc - All Rights Reserved