Re-milling a demilled - Page 3
You are Unregistered, please register to use all of the features of FirearmsTalk.com!    
Firearm & Gun Forum - FireArmsTalk.com > General Firearms Forums > Legal and Activism >

Re-milling a demilled


Reply
 
LinkBack Thread Tools Display Modes
Old 09-22-2011, 02:37 AM   #21
Feedback Score: 0 reviews
 
KABAR2's Avatar
 
Join Date: Aug 2011
Location: cHESAPEAKE,VIRGINIA
Posts: 48
Default

O.k. As far as building a DD individuals can build them as long as they are not also classified as a machinegun also... some 20mm's are automaitic cannons... a friend built a 20mm rifle using a Russian PTRD AT gun the reciever with out the barrel would transfer like any other rifle you could take a breech ring for a 105 howitzer and barrel it as a 22 and it's legal take the same breech ring and put a 105mm barrel on it and you need to do the paper work for building a DD. If you have a reciever or weld up a reciever DO NOT have the barrel that would be constructive intent.

Now black powder cannon... Muzzle loading cannon are not considered DD's and yes they can be rifled, you can build a breech loading cannon that is not a DD, it cannot use fixed ammunition with a primer, that's why people build copies of the Whitworth breech loading rifle, I have a section of 40mm barrel the will become a Whitworth this winter.... hope this helps.
KABAR2 is offline  
 
Reply With Quote
Old 09-23-2011, 02:24 PM   #22
Feedback Score: 0 reviews
 
Join Date: Aug 2011
Location: West central WI
Posts: 430
Liked 147 Times on 90 Posts
Likes Given: 43

Default

Everyone can disregard my other posts. They referred to a post I thought was inappropriate and evidently so did the administration as it has been removed.
__________________
USAF 77-99
MAC trained killer
thdrduck is offline  
 
Reply With Quote
Old 09-28-2011, 10:03 PM   #23
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
BillM's Avatar
 
Join Date: Dec 2007
Location: Amity
Posts: 1,075
Liked 237 Times on 128 Posts
Likes Given: 12

Default

Quote:
Originally Posted by c3shooter View Post
Bill- I believe you are correct- IF you are building that 20mm DD for yourself. If it is for sale, you need a Type 10 FFL, and an SOT 2.

.
Not arguing, I agree with you----but I'm still a bit curious. If the de-wat
has/had a serial number, and I were to get a DD stamp and then restore it
to function, I'm not at all sure that it wouldn't then be a fully transferable
DD. Might have to do a little checking with the ATF---I've always wanted
a Solothurn. Brings a little tear to my eye every time I see a mid sixties
ad for Solothurn and Lahti 20mm's for $99.
BillM is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
milling machine...? drhawks Engraving & Refinishing 12 09-04-2011 05:24 PM
1960's Mannlicher MC-60, 30-06 - milling a side mount plate down jbscuba Optics & Mounts 1 08-24-2010 03:23 PM
1960's Mannlicher MC-60, 30-06 - milling a side mount plate down jbscuba General Rifle Discussion 5 08-21-2010 05:15 PM
choice Milling Machine- made in China? iskatel Gunsmithing Forum 9 01-20-2010 08:33 AM
WTS: Pre Sale Spanish DEMILLED Bazooka $129.99 Cope's Distributing Sponsor Display 5 04-14-2009 08:34 PM



Newest Threads