Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Mini-14 Forum (
-   -   Rifle stocks for the minis... (

tri70 06-23-2012 05:12 PM

Rifle stocks for the minis...
What type of stocks do you like? I love the wood walnut stocks but have been using the Hogue for the all weather use. I also noticed some have a straight butt pad and some curved, I don't know if that makes much difference.

51colt 06-23-2012 06:37 PM

I have Ruger all weather stock i really need to bed it. I have been looking at the Hogue stock for a long time now. Every time i get ready buy one i buy reloading components insted.

TLuker 06-24-2012 02:36 AM

I had the factory birch stock, but the balance just didn't feel right. Actually it balanced about like a dumbbell. So I just added a Hogue stock to lighten up the but end, and it feels a lot better now. I definitely prefer wood, but I had to make an exception in this case. I have no idea what it's going to for accuracy yet (good or bad), but I would go back to wood only if it hurts accuracy.

myname 06-24-2012 10:05 PM

3 Attachment(s)
I've had the factory plastic stock, a couple of the Revolution Explorer laminate stocks, and a Hogue stock on two different Minis.
I really like the look of the Explorer laminate stocks, and kept the one I have on my Mini-14 Target Model. I sold the brown laminate stock I'd had on a 16" SS Mini-14 and went back to the factory black plastic, solely for the sake of weight reduction. Photos attached of the Target Model which still has the laminate stock, and the 16" SS Mini in both stocks. With the Target Model I really don't care about the extra 1+ lb as it is really just a bench rest rifle at least for me.
As for the Hogue stock, I just hated the feel of the thing. And according to folks who've been down that path, the Hogue stock is the harderst one to bed because of what it's made of.
Unfortunately I never had a Ruger factory wood stock of any kind to compare to the others. But to for a basic all purpose carbine the factory black plastic stock has a lot going for it.

tri70 06-27-2012 04:52 AM

Nice looking rifle set ups! Glad you made it!

myname 06-29-2012 01:15 AM

I had some self inflicted problems with my Target Model for a while, but once I got it dialed in, it is a great shooter.
The 16" Mini was sold recently. Going to get something else. Either a Mini-30 or an 300 AAC AR. Haven't decided. Really like Minis though.

hawkguy 06-29-2012 02:08 AM

1 Attachment(s)
myname, nice looking stocks on those minis!

i love the variety you can get from a mini by just changing out the stocks.

i'm a SUCKER for the factory folders, but i've never been able to convince myself to drop the coin on one of those. i do think they're probably the coolest mini stocks imo. i really wish a company would step up and make a wood stock folder again.

next to that, i'm all about wood and steel. as soon as i got my mini in its plastic stock, i knew that wasn't going to last very long!

lucked out and picked up a pretty nice wood stock form numrich for $38! :) and since i never tested it, i can't prove it....but i think my wood stock helped accuracy as it is a VERY tight fit.

only problem, i get mad every time i scratch it! :p

tri70 06-29-2012 04:41 AM

That is nice Hawk! My Dad makes custom furniture and has made a stock or two, he loves walnut wood. It would be great to find programmable cutter to make stocks for the mini 14/30.

jismail 06-29-2012 02:55 PM

As it is modeled after a military rifle, I tend to keep it looking like it's name-sake, plus i like the feel of wood....

Here is mine with the stock refinished by hand and wood upper and another shot with the source of the inspiration:

myname 06-29-2012 08:31 PM

I wonder what it would take to set up a programmable cutting machine? With 3d printing, they can scan an itme with lasers and then build up a perfect copy from laying down repetitive think layers of thermo plastic with nozzels similar to ink jet nozzles, till they build up a 3D replica. The 3D printing process isn't useful for making wood gun stocks, but I'd think the laser scanning part of the equipment could be used to measure and existing stock to make a virtual model for some type of CNC woodworking equipment to carve with.


Originally Posted by tri70 (Post 853082)
That is nice Hawk! My Dad makes custom furniture and has made a stock or two, he loves walnut wood. It would be great to find programmable cutter to make stocks for the mini 14/30.

All times are GMT. The time now is 08:06 AM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.