Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Mini-14 Forum (http://www.firearmstalk.com/forums/f95/)
-   -   Question on hogue stock (http://www.firearmstalk.com/forums/f95/question-hogue-stock-46481/)

wolfsvein 08-09-2011 02:33 AM

Question on hogue stock
 
I recently purchased a new mini 14 tactical that came with the ati stock but being a left handed shooter I can shoot with this stock even modifing it by dremeling the hing to allow my finger to move upward. So I order the hogue stock and noticed that it didn't come with a bottom hear shield. So here is my question I took the heat shield out of the at I stock and used fiber glass resin to glue it in place. Should this be OK for the long run?

GunDoc 08-09-2011 11:23 AM

For the short term you'll probably be OK, but order the correct part from Brownells.com as soon as you can. It's just a few dollars and found in the factory parts section.

wolfsvein 08-09-2011 07:17 PM

Quote:

Originally Posted by GunDoc (Post 558816)
For the short term you'll probably be OK, but order the correct part from Brownells.com as soon as you can. It's just a few dollars and found in the factory parts section.


Ok I ordered the part but will I have any issues with the Fiber glass resin over heating and catching fire? I think that was more of the question I should have asked. Thanks in advance.

wolfsvein 08-10-2011 01:57 AM

Well that issue was taken care of tonight the fiber glass'resin came out without any issues. It didn't stick to the stock. Good thing I didn't put any glass down with it.

GunDoc 08-10-2011 02:58 PM

I didn't imagine the glass would stick well, so I kind of ignored that issue. You'll find the same issue with bedding compound unless you do it my way. Check out my website for gunsmithing videos (more coming soon) and they'll help you maintain and improve your Mini. And they're free!

thegundoc.com


All times are GMT. The time now is 03:33 PM.

Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.