Originally Posted by CaseyChadwell
Wood stock, factory. I am going to buy some 69 grain match hollow points and see how they do. And yes, I'm running a 3-9x40 scope.
bullet brand and weight make a huge difference with my mini. my mini gun likes hornady v-max and shoots them to the tune of 1.5-2" groups. you might research your barrel twist rate and start from there. if I use straight plinking fare, I get 2.5-3" groups or so.
hope it gets better. 5" groups is pretty bad (hard to even get a zero with that), mine shot much
better than that out of the box. what series/model is your mini again?
wait.....you do have the strut connected
to your gas block, right? if so, be sure and check for any slipping also.
and last BUT NOT LEAST......(this has happened to me
).....CHECK your scope rings
to be sure they have not come loose.
there are a lot of variables....be sure you have checked everything.