Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Range Report (http://www.firearmstalk.com/forums/f66/)
-   -   First Time with my 700 VTR .308 (http://www.firearmstalk.com/forums/f66/first-time-my-700-vtr-308-a-24685/)

Mud4Brains 03-15-2010 01:52 AM

First Time with my 700 VTR .308
 
After sighting it in with 8 rounds at 100yds, I posted these last four.

http://lh5.ggpht.com/_hN1xg9fw1xo/S5...Pics%20195.jpg

The first three rounds are the top ones with the left stray being the first one. For those, I used 150gr Hornady Interlocks with 2820fps muzzle velocity.

For the fourth round, the bottom one, I switched to the 150gr Hornady Superformance with 3000fps muzzle velocity just to see what the difference would be.

I was really frustrated sighting this gun in because I wasn't at a real range. I was on a long straight stretch of gravel road in the woods. My target was stapled to a log that fell over after every shot...so between every shot, I had to walk out 100yds to stand the log back up, then 100yds back.

After sighting, I took it to the open field and killed about a dozen and a half armadillos. At 100yds, it was one shot one kill every time no problem. I killed two at 200yds and I was 1 for 2 at 300. I really like the BDC reticule on the Nikon Monarch that I mounted on this gun.

All said and done, I put 32 rounds down the pipe. I did a little break-in by running a brush and patch after every shot for the first 5. Then I let 'er rip after that. The groups are supposed to tighten up on this gun after about 50 rounds.

I really can't wait to get to a bench and really make this thing sing.

stalkingbear 03-15-2010 03:26 PM

It looks like you're off to a good start. Are you going to reload for it? It'll REALLY wake up with a custom tailored load worked up for it.

Mud4Brains 03-15-2010 05:02 PM

Quote:

Originally Posted by stalkingbear (Post 249012)
It looks like you're off to a good start. Are you going to reload for it? It'll REALLY wake up with a custom tailored load worked up for it.

Yes, I do intend to start re-loading. I'm looking at some of the RCBS kits. I really like the fool-proof automatic powder measure that dispenses onto the digital scale. Seems simple and safer at the same time.

Jo da Plumbr 03-15-2010 05:08 PM

Nice shooting.
Any pictures of the gun?

Mud4Brains 03-16-2010 01:58 AM

Quote:

Originally Posted by Jo da Plumbr (Post 249096)
Nice shooting.
Any pictures of the gun?

Here tis. I call it "Doom".

http://lh3.ggpht.com/_hN1xg9fw1xo/S2...0/DSC00593.JPG

http://lh3.ggpht.com/_hN1xg9fw1xo/S2...0/DSC00602.JPG

CA357 03-16-2010 02:55 AM

Nice. :cool:

jeepcreep927 03-16-2010 05:47 AM

1 Attachment(s)
Nice. How much flex does that stock have?

Bear is right on with finding a handload specific to your rifle. I have a package deal from RCBS (Rock Chucker Supreme) that had everything aside from a powder trickler and a case trimmer. Starting out and for accurate loads (which is the only reason I decided to handload aside from for fun), I dial the powder measure in few grains light and weigh every charge, bringing it up to desired weight with the trickler. It seems to be working (Remington LTR .308).

Also, what do you do with a bunch of dead armadillos? If they're just "pests" and you don't need to save ANYTHING, you might try 110 grain Hornady VMAX's. No armadillos this far north, but they will absolutely jellify a fox. I am using 47.5 grains of Varget with the VMAX, which is well under maximum. I was getting about 2 inch groups with factory ammo and was pretty disappointed, but after putting the reloads together I couldn't be happier. I don't recall the seating depth but do remember that I loaded them close to max OAL. I am sure with some effort and load developement your groups will do nothing but get tighter.

Good luck!

Mud4Brains 03-16-2010 02:44 PM

Quote:

Originally Posted by jeepcreep927 (Post 249624)
Nice. How much flex does that stock have?

Truthfully (as evident by the first pic of this thread), I'm not a good enough shooter to know the difference. Lol.

It seems pretty sturdy to me...however I've heard men much more knowledgeable than myself claim that it's junk because it's not truly floatable. Some people have taken the stock off and ground down the nodules that contact the barrel at the fore end as sort of a "hillbilly float", but said they didn't see any noticeable difference. A rep from Remington chimed in on one of the VTR threads and said that the nodules are the result of them testing the barrel and identifying the need for harmonic dampening.

My gun however, is the Cabela's version that has a 24" barrel instead of 22" and has no muzzle break giving me an effective 3.5" more barrel which means it will have different harmonics that I'm sure Remington didn't account for when they put out the Special Edition for Cabela's.

I've also heard from others that it's a tack-driver the way it is.

For me, it's a multi-purpose hunter and a SHTF/EOTW Zombie gun and it suits those needs perfectly. Maybe in the future, as I get more educated on how to shoot better, then maybe I'll start looking into custom free-floated stocks.

Till then, hitting Dillos at 300 yards is plenty accurate enough for me.

Silvertip 44 03-17-2010 03:13 AM

These 700s are really nice and shoot like a champ right out of the box. I have two new XCRs one in .223 w/24"and the other .300 WM w/26". When you start loading for it, you will really realize its potential.

paperairplane 04-06-2010 12:01 AM

To load for a rifle, a single stage press or even a lee classic loader will make ammo as good or better than anything else. It is not the fastest method.


I have a SPS Tac 308 still in break in... seems to like 150's better than 180's. I am thinking some A Max's might be the answer. Going to start reloading once I have about 200 rds of break in.


All times are GMT. The time now is 06:00 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.