Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Optics & Mounts (http://www.firearmstalk.com/forums/f65/)
-   -   Angled or straight viewfinder on spotting scope? (http://www.firearmstalk.com/forums/f65/angled-straight-viewfinder-spotting-scope-19494/)

DougG 10-26-2009 05:30 AM

Angled or straight viewfinder on spotting scope?
 
Curious about the style most commonly used in prone and bench rest. Gotta buy one or the other. I'm assuming that straight through optics is the norm for prone use.

cpttango30 10-26-2009 10:57 AM

Straight is what I have always used.

For your F-class shooting I would look at one of these. GTC Stand

DougG 10-26-2009 04:18 PM

Thanks. An amazing stand option.

Highpower 10-26-2009 06:57 PM

IMO a scope with an angled eyepiece is MUCH more versatile than the straight version - especially in the prone position. I have a Kowa scope that will rotate 360 in it's mount which allows you to have the eyepiece sitting sideways as well. With the scope low to the ground you don't have to get directly behind the scope and it can sit off to the side somewhat. With that setup, you don't have to break your prone position to look through the scope.

Along the same lines, if you are shooting from a bench using the angled scope, you won't have to crawl over the back of the bench to get to the eyepiece.
For what it's worth....

Scroll down to the bottom of the page for some illustrations:
Long Range BPCR Spotting Scopes

1919A4 10-26-2009 07:10 PM

What Highpower said. I use an angled one so I can set it up alongside me and just lean over to look at it. Works great prone, and also when on it's stand and I'm shooting off-hand.

It even works on those effeminate benches that my club makes us shoot from because the bench-resters that make up a majority of the voting membership have forgotten that there's more to shooting than locking your rifle in a vise on a concrete bench and pulling it's trigger while you sit in a lawn chair next to it. :rolleyes:

DougG 10-27-2009 05:13 AM

Thanks again. Now I just have to decide on how much quality my wallet can stand. No easy task.


All times are GMT. The time now is 02:15 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.