Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   XD Forum (http://www.firearmstalk.com/forums/f59/)
-   -   grip safety spring (http://www.firearmstalk.com/forums/f59/grip-safety-spring-92859/)

glockman12 06-25-2013 08:32 AM

grip safety spring
 
Hello I was wondering how many xdm owners out there have had there grip safety spring break on the mine broke three days ago and if u have had it break what type of spring did u replace it with

arizona98tj 06-29-2013 02:28 PM

That is the first I've heard of that issue. I would contact Springfield and ask them to send you a replacement.

yogiboobooranger 07-08-2013 01:29 PM

Are you sure the spring broke? Or is there some sort of debris stuck between the lever and grip, like pocket lint etc. Just bringing this up in case, otherwise do what was said above, call Springfield. I did some searches on the subject, and the springs do break. I also found that the spring is very difficult to replace and several sites that sell the spring says that and recommends a gun smith to do the job. In any case, good luck with replacing the spring and keep us posted.

arizona98tj 07-12-2013 03:55 AM

Quote:

Originally Posted by yogiboobooranger (Post 1298360)
I also found that the spring is very difficult to replace and several sites that sell the spring says that and recommends a gun smith to do the job. In any case, good luck with replacing the spring and keep us posted.

You can't always believe what you read. I changed mine out about a week after I bought my XDs45. Installed a PRP spring kit (waste of money in my opinion). It wasn't that difficult to do.

Of course....maybe you shouldn't believe what I just wrote either. :D

Crazvet 07-13-2013 02:03 PM

[QUOTE="arizona98tj;1302091"]

You can't always believe what you read. I changed mine out about a week after I bought my XDs45. Installed a PRP spring kit (waste of money in my opinion). It wasn't that difficult to do.

Of course....maybe you shouldn't believe what I just wrote either. :D/QUOTE]

I was gonna get the PRP kit, decided to wait a few 100 rounds and glad I did the trigger is near perfect for a carry gun.

arizona98tj 07-13-2013 11:23 PM

I have PRP trigger kits in my other 3 XD handguns and they all work perfectly. However, their "spring kit" is pretty bad. After install 4 of the 5 springs (left the striker spring out), I measured the improvement with a trigger pull gauge. An ounce....wow! :rolleyes: I put the striker spring in....dropped it about a pound. Took it to the range....light primer strikes...lots of them. Took it back home, pulled the stiker spring....is now back to 100% reliable.


All times are GMT. The time now is 05:01 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.