Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Firearm Accessories & Gear (http://www.firearmstalk.com/forums/f58/)
-   -   10/22 upgrade (http://www.firearmstalk.com/forums/f58/10-22-upgrade-28832/)

powg 06-29-2010 04:57 AM

10/22 upgrade
 
im interested in an aftermarket barrel ..torn between .920 ..have to get a stock also or just a threaded end factory contour .$$ is tight any info or good deals would be appreciated thanks ....your friendly p.o.w.g. pissed off white guy

Catfish 07-24-2010 11:25 PM

The barrel does not thread into the recever on a 10-22, it is held in by a wedge drawn into a knoch in the barrel. Anyway, you will have to open up the grove in you presenr stock or buy a new stock. I put a .920 Butler Creek barrel on a 10-22 and a Fagen stock. The Buttler Creek barrel shoots far better than the factory barrel and the gun is now an excellant squirrel gun, but it is not a compation bench gun.

Txhillbilly 07-25-2010 03:43 PM

You can use the factory stock with a .920" barrel,but you will have to sand out the barrel groove to fit the barrel and loose the use of the barrel band,or you could send your stock to this guy and have it done.Sounds like a good price to me.

FS ruger factory carbine stock bull barrel - RimfireCentral.com Forums

You can also find some good closeout deals on Boyd's stocks if you check out there site.

Limited Production Items

stalkingbear 07-25-2010 11:56 PM

The Green Mountain barrels are the best bang for the buck that I've seen of the "cheaper" bull barrels. I've had bad luck with the Butler Creek barrels having loose chambers. Some will be loose, others are fine. If you care to step it up a notch, the Shilen barrels are great for no more than they cost.

I don't understand why you would want a threaded muzzle with a .920 barrel unless you're wanting to screw on a suppressor. Then you have more paperwork of course.

pioneer461 07-27-2010 07:25 PM

There are literally tons of after market 10/22 parts out there. I was unhappy with my OTB 10/22, and replaced the stock & barrel with the Butler Creek combo (synthetic stock, carbon fiber barrel) I'm very pleased with it. :cool:

I was working at Leupold at the time, where I befriended one of their engineers. He performed a little machining magic on the bolt face, replaced the bolt buffer and mounted a Leupold 4X scope in their shop for "special" customers. When I got it back, it is a by-gosh tack driver with CCI mini mags. I haven't tried any other ammo since I converted it.


nisupply 09-26-2010 04:08 AM

Here is what I just did to mine,
I'd like to get the bull barrel as well, but not sure where to get them.

http://www.nisupplyonline.com/accoun...=1285460924216

CourtJester 09-26-2010 04:31 AM

I just ordered these. The barrel wont be here until Monday so I don't have the completed pictures yet.

Ruger 10 22 Barrel, 19.5", Heavy And Fluted From Green Mountain

Fajen Gunstocks - Legacy Series Synthetic Stocks


All times are GMT. The time now is 05:54 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.