Firearm & Gun Forum - FireArmsTalk.com > Handguns > Semi-Auto Handguns > 1911 Forum > Is there any service that i can mail in a Parkerized Trigger,Hammer&Strut

Reply
 
LinkBack Thread Tools Display Modes
Old 12-16-2011, 10:32 PM   #11
Feedback Score: 0 reviews
 
CAMCHAMPION1988's Avatar
 
Join Date: Sep 2011
Location: American Southwest
Posts: 58
Liked 1 Times on 1 Posts

Default

Let me make this understandable i couldn't find any solid stainless steel triggers, Widespur Solid Hammers and Hammer Struts. But i wouldn't mind taking the current parts and getting them mailed off to some service where the parker finish can be removed and polished to a shiny beautiful. I already did this to the Barrel by just taking a sock and Mother's Mag and Aluminum Polish to the barrel for about 45 minutes. It came out EXCELLENT. I have tried Polishing and Polishing the other parts i mentioned and not a bit of parker came off then i tried aircraft paint remover and that had no affect either. It wasn't until i took very coarse to very fine sandpaper is the only thing that took off some of the parker finish. but only some i am at the point where i can't get certain little nooks and crannies. So i need to send it off to a service unless i find some Beautiful Stainless Parts i mentioned.

yes brownells was sold out i even called to verify out of stock status.

__________________
CAMCHAMPION1988 is offline  
 
Reply With Quote
Old 12-16-2011, 11:02 PM   #12
Feedback Score: 0 reviews
 
CAMCHAMPION1988's Avatar
 
Join Date: Sep 2011
Location: American Southwest
Posts: 58
Liked 1 Times on 1 Posts

Default

Thanks JonM Slide and Cylinder does have what i am looking for thanks. But damm that hammer is $83 but i have not decided if i will just buy the parts i think i will. Thanks Again.

__________________
CAMCHAMPION1988 is offline  
 
Reply With Quote
Old 12-17-2011, 01:47 PM   #13
Feedback Score: 0 reviews
 
griffin81's Avatar
 
Join Date: Sep 2011
Location: heber springs,arkansas
Posts: 1,007
Liked 354 Times on 201 Posts

Default

I have a Taurus pt 1911 that I polished the trigger hammer and slide release. I used a sanding stone 320 grit then I used some 400 polish compound then an arkansas soft stone then a ceramic stone and some mag polish and a dremel tool. A sharpening stone will work to get the finish off ad then polish till desired shine.

play the victim, be the victim

__________________
griffin81 is offline  
 
Reply With Quote
Old 12-17-2011, 10:51 PM   #14
Feedback Score: 0 reviews
 
griffin81's Avatar
 
Join Date: Sep 2011
Location: heber springs,arkansas
Posts: 1,007
Liked 354 Times on 201 Posts

Default

Post a pic of your parts u want the Parker removed off of please. I want to see what u are dealing with if you don't mind.

play the victim, be the victim

__________________
griffin81 is offline  
 
Reply With Quote
Old 12-17-2011, 10:56 PM   #15
Feedback Score: 0 reviews
 
pagj17's Avatar
 
Join Date: Jul 2009
Location: Prescott Valley,Arizona
Posts: 2,427
Liked 208 Times on 148 Posts
Likes Given: 10

Default

Quote:
Originally Posted by CAMCHAMPION1988
Thanks JonM Slide and Cylinder does have what i am looking for thanks. But damm that hammer is $83 but i have not decided if i will just buy the parts i think i will. Thanks Again.
In the end you will probably spend as much shipping your current parts off to a refinisher.
__________________

------------Space Not for Hire.-----------

pagj17 is offline  
 
Reply With Quote
Old 12-18-2011, 02:37 AM   #16
Feedback Score: 0 reviews
 
griffin81's Avatar
 
Join Date: Sep 2011
Location: heber springs,arkansas
Posts: 1,007
Liked 354 Times on 201 Posts

Default

Before

image-1799638196.jpg

stones used

image-1589079518.jpg

After

image-3612904806.jpg

after

image-3715858441.jpg

after.

image-2702343618.jpg

play the victim, be the victim

__________________
griffin81 is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
Accu-Strut Placement? Brother_COM Mini-14 Forum 9 07-26-2011 02:30 AM
New to parkerized need help SnakeDoctor 1911 Forum 22 03-24-2011 07:49 AM
T Bladen & Son Double Hammer and Trigger English shotgun DOCSMOKEY General Shotgun Discussion 6 12-26-2010 04:56 AM
Accu-strut on NRA edition? 2hot2handle Mini-14 Forum 3 04-03-2010 05:37 AM