Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   1911 Forum (http://www.firearmstalk.com/forums/f57/)
-   -   Sarge's boring Valor shooting review (http://www.firearmstalk.com/forums/f57/sarges-boring-valor-shooting-review-19554/)

Sarge43 10-28-2009 03:55 PM

Sarge's boring Valor shooting review
 
Dan Wesson Valor
I already did a cosmetic review of this pistol elsewhere, so we’ll stick to the shooting portion of the review for today.
I don’t carry 5” barreled 1911’s, so this one is strictly a range/fun gun for me. The only thing I’ve changed since buying her is putting on some smooth Ivory grips. Other than that she’s just the way she came from the factory.
From a practical standpoint, the checkering on the frontstrap and MSH are great! No worries about the weapon moving in my hand at any time during the shooting. I did the Valor test the same day I did my CCO test, and changed weapons every 5 rounds to be fair to both. I started out with my standard setup – 50 rounds at a rapid, controlled firing pace of 1 round per second, with the target out to the 20 yard line.
http://i259.photobucket.com/albums/h...cs/001-117.jpg
If you read my CCO shooting review, you know that the guy next to me was keeping up and the whole “macho” thing got me caught up in the spirit of competition, so I started double tapping a little over half way through. Since it all fits in the test of how the weapon fires, I don’t really have a problem with that though.
As you can see in the pic, accuracy in this weapon is more than satisfactory for self defense purposes. If I were after better accuracy, I’m sure this weapon can produce it to a point much better than I can shoot it. Slowing the rate of fire down and carefully aiming each shot would have resulted in much better groups. I’m not after that, instead being after more practical ideals and accuracy in a weapon, and this one accomplished that just fine in my hands.
Shooting was VERY smooth. The 5” length and the weight it puts up front served well to tame muzzle jump and let me acquire a sight picture again very quickly. The slide felt like it was on bearings during the shooting session. All controls were positive and not “mushy” at all. No doubt as to when you snick the thumb safety on and off, and stiff enough to prevent accidentally wiping the safety off, but easy enough to be comfortable engaging it with your finger or thumb (I shoot lefty and use the side of my forefinger ion the absence of ambi safeties).
I encountered one “problem” with this weapon during the shooting – the slide would not lock back after the last round. I tried hand cycling the stock magazines, a couple Chip McCormicks that were in the bag, and my Tripps. None of them could get the slide stop to engage. I haven’t looked at this further to see what the problem here might be. Since this is not a carry weapon, I’m not all that concerned about it though. Not worth sending it back in to get checked in my book. I count rounds, so I know when the last round is out the tube anyway. Not ideal for a nanosecond type reload though.
The sights are easy to pick up with the big white ring around the tritium insert of the front post. This is a great aid in getting that sight picture back quickly.
As for actual malfunctions, there were none. I used WWB for this range trip. This weapon made it boringly enjoyable to shoot. The mere appearance of it drew people over from other lanes to ask what it was and to admire it.
Not much of a shooting review, but then again, when there are no problems, there’s not much to say. Overall, the Valor is a well built weapon with the accuracy to get the job done and the looks to be at home in a display case on the mantle.
Sarge

NGIB 10-28-2009 04:04 PM

Nice write up Sarge. You did however make a glaring error - you're supposed to take a pic of a target with 1 ragged hole and claim this is your 20 yard rapid fire group. :D

As far as the slide stop issue, I had a DW Pointman that didn't "settle in" until I got 500 or so rounds thru it. My DW was very tight from the factory and it took some shooting to get it broken in...

canebrake 10-28-2009 04:26 PM

Nice Sarge, the shooting is as good looking as the gun! http://i695.photobucket.com/albums/v...ons/cowboy.gif

Sarge43 10-28-2009 04:35 PM

Thanks NGIB and Canebrake.
I just heard from Keith at DW that the Valor slide stop does this quite often in the initial break in period due to the ceramacoat. He says that once the parts "settle in" this issue goes away an the vast majority of them. Good information to know. I guess I better get to shooting huh? :D
I have one more full review to do on a new DW Heritage that I picked up last week. Haven't even had a chance to look at her, let alone shoot her yet, but it'll come......
Sarge

lonyaeger 10-28-2009 07:41 PM

At that pace and at twenty yards....well, that's GREAT shooting!

Sarge43 10-28-2009 08:25 PM

I'll be honest. If it weren't what I considered "good", I wouldn't have posted the pics at all. :D I hadn't double tapped in quite a while, but the timing was just there that day. A few flyers, but normally I don't keep it THAT tight on double taps. You know when you just get into a groove? I was there. It was a lot of fun. :)
Thanks,
Sarge


All times are GMT. The time now is 03:51 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.