[SSGN_Doc]

Or talk to the folks at RIA. I have only read good things a out them making things right for owners if they have a problem with one of their pistols.

[kytowboater]

Originally Posted by SSGN_Doc

Or talk to the folks at RIA. I have only read good things a out them making things right for owners if they have a problem with one of their pistols.

Ah, seems I have overlooked that fact. Lol. Thanks. Ill give them a shout tomorrow. Thanks.

[utf59]

Is it failing to lock back on more than one magazine?

[kytowboater]

Originally Posted by utf59

Is it failing to lock back on more than one magazine?

Yep. Anything. I don't know if somehow I dinged the extractor outta tune?? Idk. Blah. I sent Ivan at Arnscor an email. So we shall see. It will pull the spent brass halfway out of the barrel then try to strip a fresh round jamming the slide. I have to lock the slide back, drop the mag and shake the empty out or rework the slide to extract the empty. Then load and start over.

[utf59]

Let us know how it works out.

[nightal]

Is your Extractor clocking?..check the tension, is your chamber clean, not to tight? ....RIA in Vegas #1-775-537-1444, sometimes Ivan, is on the road, call and ask for Shawn,Gene. both are GS.......

http://www.m1911.org/technic2.htm


read this down to Extractors

http://www.sightm1911.com/lib/tech/reliability_secrets.htm

this may help you also

YouTube

YouTube

[kytowboater]

I just checked the tension and its fine. Ill call Shawn again tomorrow. He told me to check the tension today. Ill send it off to RIA tomorrow and go from there. Thanks again guys.