Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   1911 Forum (http://www.firearmstalk.com/forums/f57/)
-   -   problem stripping delta 10mm (http://www.firearmstalk.com/forums/f57/problem-stripping-delta-10mm-83713/)

Mack Bolan 02-08-2013 12:09 PM

problem stripping delta 10mm
 
not sure how this happened....or how to fix...

but I tried to clean my 1911 delta 10mm yesterday and the rod that is normally recessed enough to let that small plated piece rotate to the left after you depress the bushing piece around it was sticking out too far, almost flush with the bushing that you push down to release.

most of the videos I looked up and watched showed the rod more recessed or sunken so it was never an issue once the bushing piece was depressed out of the way to rotate that small flat plated piece that is around the front of the barrel...

I know there are a good handful of 1911 experts and enthusiasts that might have encountered this before or know whats wrong with it and perhaps you can enlighten me on how to resolve the issue. no matter how hard i pushed on that rod, it would not go down far enough to rotate the other piece to the left to release the slide spring.

i posted a couple pics so you can see what i'm attempting to describe.
http://www.firearmstalk.com/photo/de...face-2397.html
http://www.firearmstalk.com/images/2...a-002-2396.jpg
delta barrel face


http://www.firearmstalk.com/images/2...a-001-2397.jpg
delta barrel face

any help or suggestions are welcome.......Thanks!
http://www.firearmstalk.com/photo/de...face-2396.html

danf_fl 02-08-2013 12:38 PM

Keeping the slide parts together, retract the slide to the point that the slide stop can be pushed out.
Once the slide is off, the FLG can be moved to allow turning of the bushing.

On reassembly, put the slide parts back together, and install the slide stop.
Care must be taken that the slide stop does go through the barrel link.

danf_fl 02-08-2013 12:40 PM

After you do all that, consider replacing the FLG with a 2 piece from Ed Brown.

Mack Bolan 02-08-2013 02:45 PM

Thanks Dan!

HOSSFLY 02-08-2013 03:19 PM

I've had that problem on several aftermarket one piece GR's myself-
Everything has to be perfect to re-install-
I too highly recommend the 2 piece-

canebrake 02-10-2013 01:00 AM

Quote:

Originally Posted by danf_fl (Post 1129133)
After you do all that, consider replacing the FLG with a 2 piece from Ed Brown.

Quote:

Originally Posted by HOSSFLY (Post 1129310)
I've had that problem on several aftermarket one piece GR's myself-
Everything has to be perfect to re-install-
I too highly recommend the 2 piece-

Or just get a GI guide rod like God intended the 1911 to have.

http://www.midwayusa.com/product/947867/les-baer-custom-1-piece-recoil-spring-guide-rod-1911-government-blue

http://i1060.photobucket.com/albums/...ps90c0d214.jpg

http://www.midwayusa.com/product/115464/wilson-combat-factory-plus-recoil-spring-plug-1911-government-blue?cm_vc=OBv1947867

http://i1060.photobucket.com/albums/...ps417ea472.jpg

Garadex 02-10-2013 09:24 AM

Cane has spoken and so it should be.

NotMormon 02-10-2013 10:08 AM

I loathe FLG's. I've never realized any benefits by using one....just unnessary grief. I put the GI rod back in my Delta and never looked back.

HOSSFLY 02-10-2013 12:43 PM

Quote:

Originally Posted by canebrake (Post 1131510)
Or just get a GI guide rod like God intended the 1911 to have.

That was such a obvious solution it never occured to me :o

Mack Bolan 02-10-2013 03:43 PM

Thanks Canebrake!!!

I had a brownells shopping cart full, just hadnt placed the order yet. Now I have one at midway...:)

I was hoping you'd chime in with some advice, not that the other suggestions weren't 100% legit and helpful.

I actually wasnt able to push the slide catch out when i tried and sure enough my impatience and improper tool usage added a small idiot scratch to my favorite piece:mad:....small as it may be, it screams "you're an idiot" right to my face every time i see it now.:o

while i was browsing this section i also came across your post with the colt defender and woodford reserve......now i have another colt handgun on my shortlist:D


All times are GMT. The time now is 11:31 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.