New Kimber Pro TLE II
Firearm & Gun Forum - FireArmsTalk.com > Handguns > Semi-Auto Handguns > 1911 Forum > New Kimber Pro TLE II

Reply
 
LinkBack Thread Tools Display Modes
Old 02-04-2011, 11:12 PM   #1
Feedback Score: 0 reviews
 
CHLChris's Avatar
 
Join Date: May 2009
Location: Portland,Oregon
Posts: 2,523
Liked 190 Times on 129 Posts
Likes Given: 89

Default New Kimber Pro TLE II

Two weeks ago I finally put the money together to buy my brand new Kimber Pro TLE II. The Pro means 4" bull barrel, the TLE means Meprolight night sights, and the II means a firing pin block safety feature (series 80).





I never fell in love with my Springfield Loaded 5". Too often the next round would get caught on the ramp. Perform ALL the time or I get rid of you.

I went to Johnson Creek Gun Club in Portland, OR as a friend's guest. And that is where I fell in love. Before the first trip I gave it a thorough field strip and cleaning. The lock-up on this one is really tight. The take down requires an odd paper-clip thingy, though. It is a little odd, but straightforward. The bull barrel is clearly hand fitted to the slide by looking at the machining marks.

The grips, which are currently rubber, are quite thick and will probably call for a replacement to slim-lines, but then I have smaller hands. The single-side safety wasn't convenient for my southpaw friend, but it worked perfectly for me. The sights are so much easier to acquire than my SA's sights because the tritium inserts have a white circle around them. The 1" shorter radius than my government model did not seem to affect the accuracy, but the decreased weight (from 40 oz. to 35 oz.) made a HUGE difference in one-handed firing.

The manual describes the break-in period as 1) clean it, 2) fire 200-250 rounds, 3) clean it, 4) fire 200-250 more rounds. I just returned from step 2 to give my thoughts.

The indoor range required targets to be at the full length so the targets were 50 feet away. Not my favorite for a break-in period, but oh well. I'll be shooting with Tackleberry at his range for the second round so I'll probably be able to keep it a little closer. I fired with Winchester white box 230 grain FMJ for the first 100 rounds. 50 rounds in the left target and 50 in the right.



I was pretty pleased at 17 yards to keep such tight groups without a bench rest. My brass ejected somewhat forward into the galley instead of laterally or somewhat backward as I'm used to with other guns. The guy next to me was happy about that. After this first 100 rounds I had a couple of loading failures that were cleared by just slamming up on the mag lightly. I fell in love with this gun within the first 100 rounds.

Then I opened a couple boxes of Blazer Brass 230 grain FMJ. I was less than impressed with this ammo. I'm glad I started with the other ammo so I knew that this was crappy ammo and not a crappy gun.



I believe I had 1 more failure during the 2nd set of 100 rounds, same type of loading failure. The slide always locked open, even on the MIM slide stop. That is the first part that will be replaced. Any other suggestions for known Kimber MIM parts that should be replaced, please let me know.

All in all, I am very pleased by this new gun. The all-black finish means it is not flashy, which is great. I had one guy ask, "Is that a .45?" But nobody seemed to be fawning over my flashy gun. It was just one more black gun. It was probably the best black gun in the range, though.

__________________
.45acp, .40 S&W, 9mm, .38 Spl, .380 acp, 22lr
12 gauge, .223/5.56x45mm, 30-30 Winchester


2 Chron. 7:14 Christians must seek His face

Last edited by CHLChris; 02-04-2011 at 11:17 PM.
CHLChris is offline  
 
Reply With Quote

Join FirearmsTalk.com Today - It's Free!

Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.

Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.

Join FirearmsTalk.com Today! - Click Here


Old 02-04-2011, 11:19 PM   #2
Feedback Score: 0 reviews
 
Squirrel_Slayer's Avatar
 
Join Date: Aug 2010
Location: Rocklin,California
Posts: 1,135
Liked 1 Times on 1 Posts

Default

Nice pistol. My Kimber has never malfunctioned once, break in or other wise. It has shown an affinity for nothing but 230 grain ball ammo though. Groups get way bigger when I try to feed it any light weight ammo. Great acquisition. I am gonna go poke some paper with mine this weekend so I'll take somee pics and give ya'll a range report Monday morning.

__________________
Squirrel_Slayer is offline  
 
Reply With Quote
Old 02-04-2011, 11:26 PM   #3
Feedback Score: 0 reviews
 
CHLChris's Avatar
 
Join Date: May 2009
Location: Portland,Oregon
Posts: 2,523
Liked 190 Times on 129 Posts
Likes Given: 89

Default

When I was in line at a NW chain called Bi-Mart where I bought the Blazer Brass ammo, I put the 4 boxes on the counter. The woman in front of me (who was probably thinking I was going to go shoot a crowd of people or something) asked, "What are you hunting?" I just smiled and said, "I'm just shooting for fun. I'll be shooting pieces of paper." Then, when the guy behind me put down another pile of ammo to buy, that lady, visibly uncomfortable, turned and walked out.

Kinda funny.

__________________
.45acp, .40 S&W, 9mm, .38 Spl, .380 acp, 22lr
12 gauge, .223/5.56x45mm, 30-30 Winchester


2 Chron. 7:14 Christians must seek His face
CHLChris is offline  
 
Reply With Quote
Old 02-04-2011, 11:27 PM   #4
Feedback Score: 0 reviews
 
lonyaeger's Avatar
 
Join Date: Aug 2009
Location: Bandera,Texas
Posts: 10,381
Liked 58 Times on 35 Posts
Likes Given: 1

Default

Nice pistol, Chris, and a very well-done range report.

__________________
lonyaeger is offline  
 
Reply With Quote
Old 02-04-2011, 11:29 PM   #5
Feedback Score: 0 reviews
 
Squirrel_Slayer's Avatar
 
Join Date: Aug 2010
Location: Rocklin,California
Posts: 1,135
Liked 1 Times on 1 Posts

Default

Blazer is usually the cheapest and always shot the best out of mine. Now it only sees handloads. Once shot range brass, 6.2 of Herco behind 230 copper jacketed ball ammo, and CCI primers.

__________________
Squirrel_Slayer is offline  
 
Reply With Quote
Old 02-05-2011, 12:02 AM   #6
Feedback Score: 0 reviews
 
TGReaper's Avatar
 
Join Date: Oct 2009
Posts: 123
Liked 3 Times on 1 Posts

Default

Nice looking pistol, You make me feel bad, I just bought a 4 in. 1911 and I can't get to do much but handle it and daydream. Our range is under 6 ft of snow.Thanks for the report
Dan

__________________

When we remember we are all mad, the mysteries disappear and life stands explained.

Mark Twain

TGReaper is offline  
 
Reply With Quote
Old 02-05-2011, 01:12 AM   #7
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
CA357's Avatar
 
Join Date: Nov 2007
Location: Oregon
Posts: 19,871
Liked 1175 Times on 510 Posts
Likes Given: 2978

Default

Congratulations. Enjoy that new pistola.

__________________
“If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen.”Samuel Adams
CA357 is offline  
 
Reply With Quote
Old 02-10-2011, 02:18 AM   #8
Feedback Score: 0 reviews
 
mjkeat's Avatar
 
Join Date: Jul 2010
Location: Wichita,Kansas
Posts: 4,026
Liked 8 Times on 8 Posts

Default

Good looking firearm. Nice choice.

__________________
mjkeat is offline  
 
Reply With Quote
Old 02-10-2011, 03:09 AM   #9
Feedback Score: 0 reviews
 
Join Date: Mar 2008
Location: I see you, and you will not know when I will strike
Posts: 24,301
Liked 3479 Times on 1609 Posts
Likes Given: 3590

Default

I see a lot of Kimber hate on line. I will agree that they have had some highs and lows to quality, but I believe that if you pay for one of their higher end models, you are getting a quality product for the money.

In this case, you have had added a hell of a nice weapon to the collection.

Congrats on an excellent purchase. Now get back to the range and tighten up those groups.

JD

__________________
Dillinger is offline  
 
Reply With Quote
Old 02-10-2011, 11:17 PM   #10
Feedback Score: 0 reviews
 
CHLChris's Avatar
 
Join Date: May 2009
Location: Portland,Oregon
Posts: 2,523
Liked 190 Times on 129 Posts
Likes Given: 89

Default

Quote:
Originally Posted by Dillinger View Post
I see a lot of Kimber hate on line. I will agree that they have had some highs and lows to quality, but I believe that if you pay for one of their higher end models, you are getting a quality product for the money.

In this case, you have had added a hell of a nice weapon to the collection.

Congrats on an excellent purchase. Now get back to the range and tighten up those groups.

JD
What? 8" isn't good for 50 rounds at 50 feet just standing? Perhaps not, but not a single round sailed on me. With good ammo I know that this will be a firearm I will be able to trust with my life. Even with bad ammo...I just wouldn't want to be the one standing behind the bad guy.

It seemed to me that until you get into their custom shop, all of the products are cut from the same cloth, with just different features. Like the features of the awesome-looking Raptor II that you (JD) have suggested in another thread is basically the same pistol as some others less expensive (same MIM parts, that is) with a few cool features that cost some extra money.

Since I have a couple of Kimber owners on this thread, which MIM parts should I start to weed out of this pistol? I will be switching out the slide stop first, but probably a couple thousand rounds from now. Any other ideas? I'm thinking long-term.
__________________
.45acp, .40 S&W, 9mm, .38 Spl, .380 acp, 22lr
12 gauge, .223/5.56x45mm, 30-30 Winchester


2 Chron. 7:14 Christians must seek His face
CHLChris is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
45+P Kimber stuii 1911 Forum 6 07-06-2011 11:05 AM
kimber? 270 win General Rifle Discussion 3 03-20-2010 01:40 AM
New Kimber Dustoff 1911 Forum 18 11-24-2008 07:18 PM