I Believe that....
Triggers with overtravel adjustment should not be fitted to Series 80 Colts.
When the overtravel is adjusted to give minimum overtravel, it will not allow the firing pin plunger to work the full length. Resulting in "nicks" on the plunger caused by the firing pin. The nicks could 1) eventually stop the firing pin from striking the primer, 2) hinder movement of the plunger assembly to the point of not being able to pull the trigger, and 3) make total disassembly of the slide difficult.
I've seen this myself. I've also seen the overtravel adjusted so tight that the sear will partially snag the half-cock notch on the hammer. Too much of a good thing can be a bad thing...
|All times are GMT. The time now is 06:31 AM.|
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.