Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   1911 Forum (http://www.firearmstalk.com/forums/f57/)
-   -   Advice/Comments on new gun (http://www.firearmstalk.com/forums/f57/advice-comments-new-gun-77141/)

HarryBase 11-26-2012 06:50 PM

Advice/Comments on new gun
 
1 Attachment(s)
New to the world of sport shooting. Recently purchased the sig nightmare 1911. Have probably 250 rounds through it at this point of varying ammo (230 ball ammo, 200 hollow points, and some 185 +p). All flawlessly. Any suggestions or recommendations?Or run it as is?

Olympus 11-26-2012 08:05 PM

Not sure what you're asking suggestions or recommendations for.

HarryBase 11-26-2012 08:12 PM

Thoughts or personal experience with sigs 1911 line or any suggested improvements on it I should get done. Like I said, brand new to all of this, so anything is appreciated.

weapon 11-26-2012 08:22 PM

Put it in a Versa Max 2, attach to belt. That was just about all the aftermarket work that went into my recent SR1911...should also work for the Sig.

Correction, the full list at this point is:
Polished the feed ramp and internals
Adjusted bend on sear spring slightly
Tested trigger on gauge: 4.0lbs.
Fired 500 rounds for break-in
Cleaned and re-lubed, oil here grease there as needed.
Built VM2-style holster, attached to belt.
Already had spare mags and mag carrier.

If you fire that many rounds and it works with your intended carry round, why mess with it? Ain't broke, don't fix it.

danf_fl 11-26-2012 08:39 PM

What I would do is shoot the snot out of it and fix any problems as they occur.
Polishing a feed ramp without needing it is voiding warranty and is probably not needed (250 already through it flawlessly)

Olympus 11-26-2012 09:21 PM

It sounds like you've got a perfectly functioning pistol. If it ain't broke, don't fix it!

And asking for opinions on something after you've already bought it is kind backwards. It's yours now, no matter what we have to say about Sig 1911s. :) The good news is that most of us around here think pretty highly of the Sig 1911. I don't have one myself, but my brother has 2 and my FIL has 1 and I've spent a good deal shooting them and I wouldn't blink an eye about buying one for myself.

orangello 11-26-2012 10:43 PM

Find some gold grips for it.
;)

HarryBase 11-26-2012 10:54 PM

It was kind of an impulse buy, understanding the error in my ways, but I have a relative that works for sig here in NH. so I didn't break the bank on it ($640 for gun, holster and a 3rd mag)

ryguy00 11-26-2012 11:18 PM

were you wearing a mask?

HarryBase 11-26-2012 11:40 PM

Quote:

Originally Posted by ryguy00
were you wearing a mask?

No! Lol, employees get a smoking deal on their products, so I didn't think I could loose even if I hated it. Which I absolutely do not!


All times are GMT. The time now is 11:23 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.