Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Glock Forum (http://www.firearmstalk.com/forums/f56/)
-   -   Stove Piping Glock 23 (http://www.firearmstalk.com/forums/f56/stove-piping-glock-23-a-19128/)

Littlejack 10-14-2009 04:41 AM

Stove Piping Glock 23
 
HELP!!!!! I am reloading a Reduced Cal Load for my Glock 23--the .40 Cal---I am Shootin 180 Grain Lead Bullets Loaded with 5.0 Grains of Winchester Super Field thru a Storm Lake Match Barrel---gettin some Stove Pipes? OAL is 1.105 inches? Will goin to the 13 Pound Spring help me out????? HELP Jack

falseharmonix 10-14-2009 05:41 AM

Jack,

Welcome to the forum. I might suggest you stop by the Introductions forum and post a little something about yourself. Soon after you might find a few people will have some advice for ya :)

Ram Rod 10-17-2009 03:04 PM

Have you tried cutting any coils off the spring? Tried an 11lb spring? Maybe your loads are too weak. If you are doing competition, your loads should meet minimum power factors anyway. You may also be limp wristing the pistol since you know you're shooting reduced loads....just not ruling out anything here at this point.

Mark F 10-17-2009 03:07 PM

Quote:

Originally Posted by Littlejack (Post 173790)
HELP!!!!! I am reloading a Reduced Cal Load for my Glock 23--the .40 Cal---I am Shootin 180 Grain Lead Bullets Loaded with 5.0 Grains of Winchester Super Field thru a Storm Lake Match Barrel---gettin some Stove Pipes? OAL is 1.105 inches? Will goin to the 13 Pound Spring help me out????? HELP Jack

TWO choices:

1) increase powder charge AND/OR bullet weight.

or

2) install a 10.5 to 11.5 pound spring.

Best choice...

Get a CZ75B or a 1911

Littlejack 10-17-2009 09:54 PM

Thanks Guys!!!! Yes I think I am Limp Wristing some---I Have a New 13 Pound Spring ordered---5.0 Grains of Winchester Superfield for the 180 Lead ??? Not sure just what it Cronnies----Lets try the Lighter Spring First as I have 800 Rounds Loaded up with this Crappy Lead!!!! LOL Still Learnin here----The Stock Spring is 17 LBS I Beleive so it's worth the try!!!!! Thanks all!!!! Jack

Ram Rod 10-17-2009 10:10 PM

Well, let's just say that changing one thing at a time will narrow it down sooner than changing everything. Current factory rating for the G23 should be 18lbs...previous models did 17lbs.......not much difference really, but anything above and below should be considered extra power or reduced power accordingly. Might I ask if you are running a captive or non-captive rod? Round spring, or flat wire? I've been tossing the idea around myself for competition, but I only use factory ammo. Grip/hold that Glock just like you would with full power loads IMO.


All times are GMT. The time now is 04:13 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.