Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Glock Forum (http://www.firearmstalk.com/forums/f56/)
-   -   Storm Lake 21 to 10MM Conversion (http://www.firearmstalk.com/forums/f56/storm-lake-21-10mm-conversion-102670/)

sparky80 01-12-2014 12:14 PM

Storm Lake 21 to 10MM Conversion
 
Been looking at one for awhile but, different sources online claim different things. Some say you need a extractor change and spring change, some say only one or the other. Other places say just swap the barrel. So does anyone have one?

scubadvr 01-13-2014 11:21 PM

What Gen Glock to you have? I emailed glockmeister and asked them what would be needed for my Gen 4. They said just barrel and mags.

gunny91 01-13-2014 11:38 PM

A glock 21 is a 40 cal ant it?

Sent from my SCH-R530U using Firearms Talk mobile app

sparky80 01-14-2014 12:03 AM

I have a Gen 4 21. 21 is 45 ACP. Thanks

gunny91 01-14-2014 01:57 AM

I never got into flocks so I don't know what is what but I used to work at storm lake barrels as a machinist

Sent from my SCH-R530U using Firearms Talk mobile app

gunny91 01-14-2014 02:00 AM

But for what ur asking u can just switch out barrels its no different then getting a 9mm conversion barrel for a 40 cal

Sent from my SCH-R530U using Firearms Talk mobile app

robocop10mm 01-14-2014 03:38 AM

That's a new conversion to me. I am not sure how the .45 extractor/ejector will perform w/ 10mm

SSGN_Doc 01-14-2014 03:48 AM

A .45 has a bigger breech face. Not sure how well it would work without a whole top end.

robocop10mm 01-14-2014 03:50 AM

The difference between .40 and 9mm is quite small compared to the difference betwen .45 and 10mm/.40

gunny91 01-14-2014 11:30 AM

It will be sloppy but it will still perform

Sent from my SCH-R530U using Firearms Talk mobile app


All times are GMT. The time now is 04:00 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.