My trigger jobs shorten the sear and change the angle of the sear.
Change the angle of the firing pin safety ramp on the trigger bar. Change the angle and round out the firing pin safety plunger.
Polish trigger bar, connector, firing pin, safety plunger.
Glockworx competition spring kit and V3 connector. Lone wolf trigger stop trigger housing.
I also eliminate trigger take up, but rather not divulge the process as it can result in a full auto if not done properly.
The end result is an excellet competition trigger...1.5-2.5# trigger pull(depending on the shooters request) with less than 3/32" take up, zero overtravel, and a crisp reset. This has taken a bit of trial and error, some ruined parts, and some damaged tooling.
For those inexperienced in machine work, I don't suggest attempting to change the angle or remove material. The spring kit and connector will greatly improve your stock setup.
I could make a list of a bunch of guns i have, or "have", or wish I had. Why would one feel compelled to provide that infornation freely? Do you feel the need to show off? Is it some immature game of oneupsmanship?
Why do you feel it necessary to list your guns?