Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Glock Forum (http://www.firearmstalk.com/forums/f56/)
-   -   sighting it in (http://www.firearmstalk.com/forums/f56/sighting-85750/)

ohiomike 03-04-2013 04:34 PM

sighting it in
 
I noticed I have started hitting right of my aim point. Been doing it for a while. So I picked up a laser bore sight. Threw it in and lo and behold my sights are off a couple inches at 20' or so.

So I need to move the rears but as they seem pressed in do I need one of those little tools for moving it or can I just use a brass drift and tap it over?

derpie 03-04-2013 05:59 PM

Yes either way will work fine

ohiomike 03-04-2013 07:01 PM

thanks alot

dango 03-04-2013 10:48 PM

I got a few hand guns and they are all different. I just compensate , aim a little off which ever way , which ever gun , But , know thy guns.....! :)

ohiomike 03-05-2013 12:28 PM

So I'm figuring I should tap the rear over to the left, right?

HOSSFLY 03-05-2013 12:38 PM

Quote:

Originally Posted by ohiomike (Post 1164269)
So I'm figuring I should tap the rear over to the left, right?

Move the rear site in the same direction you want to move the POI-

ohiomike 03-06-2013 12:37 PM

LOL, that's what I originally thought, then got to thinking....lol. Overthinking something can be scarey sometimes.

thanks

HOSSFLY 03-06-2013 12:54 PM

Quote:

Originally Posted by ohiomike (Post 1165716)
LOL, that's what I originally thought, then got to thinking....lol. Overthinking something can be scarey sometimes.

thanks

Yeah- When talking front/rear sight adjustment for POI its so simple you have to think twice (least i do every time) :D

ohiomike 03-13-2013 11:45 AM

I found the sights sit very tight in the dovetal, too tight to just tap over. So I talked to the gun shop I bought my 23 from and he said those laser bore sights aren't reliable and even though he has one he never uses it. He said he will use his glock sight tool to move it for me if I really want him to but he doesn't see the need. I see those tools cost like $100 of so, if they weren't so expensive I would just pick one up for myself.


All times are GMT. The time now is 09:03 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.