NY1 and 3.5 Connector
So I installed the LWD 3.5 connector and NY1 trigger spring on my G21SF, and my Glock wont work, the trigger bar slips off the connector and there is a thud when I pull the trigger and it doesnt release the firing pin. If i push my Glock tool into the cutout in the back of the slide and hold the connector in place I can get the trigger to release and I can dissasemble the gun,
I messed with this for about an hour last night and tried every combination I could with the 5 and 3.5 connector and with the NY1 and stock trigger spring and the only combination that DOESN'T work is the 3.5 and NY1 spring.
Also I looked and others have this issue but to strip the gun with the NY1 spring I have to pull the trigger, release the slide lock and then pull the trigger back again to release the slide, common I guess with the NY1 spring?