Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Glock Forum (
-   -   NY1 and 3.5 Connector (

Heart-ShapedGlasses 06-06-2007 04:48 PM

NY1 and 3.5 Connector
So I installed the LWD 3.5 connector and NY1 trigger spring on my G21SF, and my Glock wont work, the trigger bar slips off the connector and there is a thud when I pull the trigger and it doesnt release the firing pin. If i push my Glock tool into the cutout in the back of the slide and hold the connector in place I can get the trigger to release and I can dissasemble the gun,

I messed with this for about an hour last night and tried every combination I could with the 5 and 3.5 connector and with the NY1 and stock trigger spring and the only combination that DOESN'T work is the 3.5 and NY1 spring.

Also I looked and others have this issue but to strip the gun with the NY1 spring I have to pull the trigger, release the slide lock and then pull the trigger back again to release the slide, common I guess with the NY1 spring?

westernamerican 06-17-2007 06:24 PM

Tell you how mine works soon as I get the NY1 I just ordered.....

westernamerican 06-18-2007 09:49 PM

Maybe the NY1 will grow on me, but right now I must say I am not impressed! :( :rolleyes: :D

westernamerican 07-01-2007 06:43 PM

Removed and went back with OEM Trigger setup! :D

dglockster 09-26-2007 05:37 PM


Removed and went back with OEM Trigger setup!
Ditto except I kept the 3.5# connector.

westernamerican 01-23-2009 11:27 PM


Originally Posted by dglockster (Post 8866)
Ditto except I kept the 3.5# connector.

I put the 3.5# LWD connector on all my GLOCKs! :D

Captain38 01-24-2009 12:55 PM

I use NOTHING BUT original factory internal parts in MY Glocks and they're ALL set up the same way:

3 1/2 connectors plus the NY1

Trijicon night sights

Glock extended slide stops except for my G36

I have NEVER had a single problem of any kind with any of my Glocks that wasn't due strictly to OPERATOR ERROR!

All times are GMT. The time now is 11:56 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.