Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Glock Forum (http://www.firearmstalk.com/forums/f56/)
-   -   Lube (http://www.firearmstalk.com/forums/f56/lube-920/)

Sponge 06-12-2007 06:15 PM

Lube
 
A friend of mine was telling me that I needed to lube the gun so it would operate more smoothly and be less prone to failure/jamming etc. He was recommending something called Metrotex or something close to that, I'm not sure what.

My father taught me to clean the my guns meticulously with good cleaner, but we never lubricated anything...of course this was always hunting rifles, and it may be different for semi-auto pistols. If someone could enlighten me on whether Glocks need this, and if so, what's a good product to look for, I'd appreciate it.

Also, what are the benefits/drawbacks/considerations to using lube?

Doc 06-21-2007 06:36 PM

Quote:

Originally Posted by Sponge (Post 2972)
A friend of mine was telling me that I needed to lube the gun so it would operate more smoothly and be less prone to failure/jamming etc. He was recommending something called Metrotex or something close to that, I'm not sure what.

My father taught me to clean the my guns meticulously with good cleaner, but we never lubricated anything...of course this was always hunting rifles, and it may be different for semi-auto pistols. If someone could enlighten me on whether Glocks need this, and if so, what's a good product to look for, I'd appreciate it.

Also, what are the benefits/drawbacks/considerations to using lube?


Yes, it needs lube. Read the manual.

dglockster 09-26-2007 06:44 PM

A major cause of problems with Glocks is improper lubrication, primarily over-lubrication. Glocks need very little lube in order to function properly.

A good guide to lubing the Glock can be found at http://glockmeister.com/glubric.shtml.

One point that I want to emphasize is the statement that reads:
Quote:

The most important drop of oil is placed where the trigger bar and connector meet. Failure to properly lubricate the junction of the trigger bar and connector can lead to premature wear and a very heavy trigger pull.
If you never lube any other location on the Glock, be sure to periodially put one drop - and no more than one - at this location.

jeepcreep927 10-24-2007 09:17 AM

All guns need lubrication. Lubrication should be "felt but not seen". The same holds true for Glock pistols. Wipe off any excess and a single drop on the "cross" where the trigger bar and connector meet.


All times are GMT. The time now is 12:06 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.