Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Glock Forum (http://www.firearmstalk.com/forums/f56/)
-   -   How To Install a 3.5lb Connector? (http://www.firearmstalk.com/forums/f56/how-install-3-5lb-connector-602/)

Old-Fashioned 05-24-2007 04:55 PM

How To Install a 3.5lb Connector?
 
I just purchased a Glock disassembly tool and a 3.5 lb connector for my G17. Before I jump in to this project, I am curious to learn how difficult it is to make the trigger a 3.5 lb. pull as compared to the 5.5 lb.?

jberry 05-30-2007 07:33 PM

connector change
 
Takes about 5 minutes, tops; but, you really need pictures to go by. It's hard to describe...:)
Here is a link, don't need to do the slide disassembly...and the responsibility is your own...http://www.alpharubicon.com/mrpoyz/glock/

dglockster 09-28-2007 01:06 AM

Old-Fashioned,
If your username is accurate, you may like to have printed material to work from rather than a web site. If so, I recommend that you get the Patooma The Complete GlockŪ Reference Guide.

It's available here: http://www.sportsmansguide.com/cb/cb.asp?a=148260 and probabely elsewhere as well.

westernamerican 01-23-2009 11:25 PM

Quote:

Originally Posted by dglockster (Post 8949)
Old-Fashioned,
If your username is accurate, you may like to have printed material to work from rather than a web site. If so, I recommend that you get the Patooma The Complete GlockŪ Reference Guide.

It's available here: The Complete Glock Reference Guide, Shooting Supplies, Lonewolf at Sportsman's Guide and probabely elsewhere as well.

I second your recommendation. This is the best book on the market for GLOCK owners to have IMHO! :D


All times are GMT. The time now is 01:45 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.