Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Glock Forum (http://www.firearmstalk.com/forums/f56/)
-   -   GLock 19 trigger question? (http://www.firearmstalk.com/forums/f56/glock-19-trigger-question-40477/)

M118LR 03-29-2011 03:59 PM

GLock 19 trigger question?
 
im looking for a 3 lbs trigger with a quick reset. any ideas?

Sniper03 03-29-2011 05:37 PM

M118

If you need any professional information on the Glock or pertaining to your question. I would direct you to a master of the Glock Pistol. Nick can answer any question or take care of most things you might need. We have been friends for years. Just advise him the old LT from Tennessee said Hi!

Tel. 317-445-5957
E-mail: nick@myglockdoc.com

voyager4520 04-09-2011 01:17 PM

To get close to 3lbs you'd probably need a 3.5 connector which actually brings the trigger to about 4.5lbs. Then a 6lbs trigger spring. It's a heavier than stock spring but that spring resets the trigger, pulling the trigger does not pull against that spring in fact the spring slightly aids in pulling the trigger.

You might end up with 3.75lbs, maybe 4lbs with that set-up. They do make "2.5" connectors but I've never heard of someone using one. Anything beyond that you might consider a rounded firing pin safety, like the Lightning Strike one and professionally polished parts. You could polish the parts yourself(aka 25 cent trigger job), but it's very easy to remove too much metal and if you remove too much the gun either won't function or it won't function safely. If I were to do a 25 cent trigger job, I wouldn't polish the firing pin at all because it costs like $40 to replace.

The "3.5 Rocket" by Ghost Inc can reduce over-travel and give a more positive reset.


All times are GMT. The time now is 07:43 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.