Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Glock Forum (http://www.firearmstalk.com/forums/f56/)
-   -   Gen 4 Backstrap Fit (http://www.firearmstalk.com/forums/f56/gen-4-backstrap-fit-41489/)

Dave-In-Maine 04-19-2011 12:10 PM

Gen 4 Backstrap Fit
 
Good morning-
1st post here, I think, so sorry if this has been covered--the "search" feature didn't turn up what I was looking for.
I am now the very pleased owner of a G19 and G26, both Gen 4, and my question is about the different-sized backstraps.

Other than "use whichever one feels best" is there a rule of thumb, of sorts, for determining which one is the best to start with?

I've tried them all with numerous dry-fire exercises and a few rounds through the pistols, and they all feel "okay." The difference being how much of my finger rests on the front of the trigger guard--everywhere from "the tip just barely" to "right in the middle of the first pad."

So, any thoughts or advice, much appreciated.

BlindOldMan 04-19-2011 12:46 PM

Quote:

Originally Posted by Dave-In-Maine (Post 489518)
I've tried them all with numerous dry-fire exercises and a few rounds through the pistols, and they all feel "okay." The difference being how much of my finger rests on the front of the trigger guard--everywhere from "the tip just barely" to "right in the middle of the first pad."

So, any thoughts or advice, much appreciated.

Search on "trigger finger placement" might give some good info..

I was taught to use the pad on my trigger finger and just make sure to pull it straight back. I.e., there's a tendency to push sideways so take pains to avoid this. So first, place the hand up against the rear of the gun (up close to the slide) which gives more palm contact with the grip. Attach the backstrap so the trigger finger is comfortable to allow this straight motion while the webbing of your shooting hand is up high. Again, this is how I was taught but it's been years so current technique might be different.

Dave-In-Maine 04-21-2011 10:41 AM

Thanks--I've got the finger-pad-placement-on-the-trigger thing down, was just wondering if there are other considerations from those who shoot a lot.

Like I said, the three different arrangements all feel fine, I can work with any of them, but definitely notice the differences from when I slide my straight finger off the frame down toward the trigger. With the smallest, my finger pad ends up right on the front edge of the trigger guard, with the largest, it just barely touches it.

I have a light that I might use occasionally, so the smaller grip would allow better finger-tip activation of the switch, so I will probably stick with that. Overall, the smaller feels marginally more comfortable.

It's all good!!!

Dizzll 04-25-2011 05:16 AM

Whatever gives you the best control of the weapon. Also it's normal for new Glock shooters to fire low and to the left until you master the pull.


All times are GMT. The time now is 11:29 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.