Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Glock Forum (http://www.firearmstalk.com/forums/f56/)
-   -   G26 & 27 recoil spring the same? (http://www.firearmstalk.com/forums/f56/g26-27-recoil-spring-same-41471/)

yamhill40 04-18-2011 11:09 PM

G26 & 27 recoil spring the same?
 
Howdy,

Just picked up a gen 4 Glock 27. From what I'm reading on the web (and I’m sorry if this has been brought up in here before, I did a few searches…) has indicated that I could put a conversion barrel and a Glock 26 mag and I'd be set up for 9mm. Would I also need a different recoil spring for this conversion? What are the warranty ramifications? Are there any other reported issues with this conversion, or is it that both the 26 & 27 are identical with the exception of their barrels and magazines? Where are best place to pick up these conversion barrels? Another article in here indicated that Cheaper-Than-Dirt had some good deals. Thanks.

afi1 04-19-2011 02:28 AM

I cannot comment on this directly because I've never used a conversion in the 27, but I have used one in a 22. It worked fine. Some people report having FTE malfunctions, and switch the extractor for one from a 9mm. I haven't heard of switching spring/guide rods though.

yamhill40 04-19-2011 06:26 AM

Thanks for the response. Good to know about the extractor!

Dzscubie 04-19-2011 03:19 PM

Glass (department Glock armorer) says the 26 and 27 are the same spring system, it is a double spring recoil system.


Scubie

yamhill40 04-19-2011 04:03 PM

Excellent, thank you!


All times are GMT. The time now is 10:19 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.