Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Glock Forum (http://www.firearmstalk.com/forums/f56/)
-   -   3.5 trigger (http://www.firearmstalk.com/forums/f56/3-5-trigger-90764/)

nate913 05-16-2013 01:28 AM

3.5 trigger
 
Hello, thinking of putting a 3.5 trigger on my g22. Watched a few YouTube videos, looks like something I can handle. A few questions for those that have done this. Can you really tell a difference in the speed. And what's the best brand, I've heard ghost tossed around a lot.

25-5 05-16-2013 02:39 AM

Please be aware of warranty issues, and in the case of self defense responsibility for an altered trigger.

nate913 05-16-2013 03:18 AM

Quote:

Originally Posted by 25-5
Please be aware of warranty issues, and in the case of self defense responsibility for an altered trigger.

If I have to use it in self defense, that should be the last of my worries, but, yes, I do understand where you are coming from!!

gunsmoke11 05-16-2013 05:30 AM

Seems to me that most incidents regarding accidental discharges where Glocks are concerned involved people playing gunsmith by reducing the trigger pull. The 5.5 lb factory trigger pull is fine, at least where I'm concerned. If someone's intent is to accidentally blow their nuts off then be my guest, but please make sure it's yours and no one else's.

sputnik1988 05-16-2013 05:47 AM

I was wondering the same thing, but to be honest I'm content with the factory weight, I just want a smoother pull, should I just have a professional trigger job done?

gunsmoke11 05-16-2013 06:22 AM

The NYPD have their Glock triggers changed to the NY1 trigger, which is 11 lbs. They've been used with lots of success, so 5.5 lbs even if a little rough is a piece of cake. After all, it is what it is a work gun and this is a Glock and not a target pistol.

Kraj 05-16-2013 06:27 AM

Quote:

Originally Posted by sputnik1988 (Post 1248433)
I was wondering the same thing, but to be honest I'm content with the factory weight, I just want a smoother pull, should I just have a professional trigger job done?

Look up 25 cent trigger job on YouTube. Basically you polish all the stock parts to make them run smoother. Very little change in pull weight. Also if it's anything glock you can handle it, all you need is a punch

sputnik1988 05-16-2013 06:34 AM

Quote:

Originally Posted by Kraj (Post 1248449)
Look up 25 cent trigger job on YouTube. Basically you polish all the stock parts to make them run smoother. Very little change in pull weight. Also if it's anything glock you can handle it, all you need is a punch

Thanks.


And my work guns and target guns are the same guns:p I'm cheap like that

nate913 05-16-2013 12:28 PM

Thanks for all the info. I'm not really looking on advise to do it or not. I am going to do it, but more so looking for advise on what brand to use!!

rifleman77 05-16-2013 01:00 PM

I got a ghost drop in connector on amazon for around $25. And I do like it alot on my G21. It's not a hair trigger it just makes the pull a lot crisper. Installation is very easy.


All times are GMT. The time now is 08:40 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.