 |
 04-27-2010, 06:43 PM | #1 | Junior Member Join Date: Mar 2010 Location: Raleigh, NC, North Carolina Posts: 4 |  M4 simunitions training
Question.... Does anyone know where I can get M4 Simunition carbines without the conversion kits? For example, Glock sells the sims guns without converting your duty weapon. I am looking for the same with the M4's so I can get my guy's trained.
Thanks,
BF | 
|
 |
| 04-28-2010, 01:14 AM | #2 | Senior Member Join Date: Oct 2007 Location: Newport, Vermont Posts: 1,110 |
Simmunitions sells a complete upper for their sim rounds. I have never seen a complete "blue", including the lower. __________________
"People live too long, dogs don't live long enough" - FTF Member- | |
|
|
| 05-03-2010, 11:20 PM | #3 | Member Join Date: May 2010 Location: Sacramento, Northern California Posts: 56 |
Quote:
Originally Posted by jeepcreep927
Simmunitions sells a complete upper for their sim rounds. I have never seen a complete "blue", including the lower.
|
I know when we purchased SIMS for our Team, we bought just the uppers for the M4 and also the Glock 19 version for the HG. I do not think you can purchase the whole M4 due to it using a lower. With our SIMS uppers, we just dedicated some of our old M-16's as our SIMS guns since they are no longer utilized. | |
|
|
| 05-05-2010, 02:48 PM | #4 | Senior Member Join Date: Oct 2007 Location: Newport, Vermont Posts: 1,110 |
These may be more of a hassle than simmunitions, but it's the complete "rifle" versus just the upper. Didn't appear to be too pricey, depending on your budget of course.
Law Enforcement Targets, Inc.: Real Action Marker M4 Training Weapon__________________
"People live too long, dogs don't live long enough" - FTF Member- | |
|
|
| 05-05-2010, 03:10 PM | #5 | I'm always 10-8 Join Date: Jan 2009 Location: 150 miles NE of Sloppy Joe's Bar, in the "GunShine" State Posts: 19,200 Liked 7 Times on 6 Posts
Likes Given: 6
|
__________________ .
 .. Colt 11101110111..MEMBER: FAAM, NRA, GOA, DAV, USSV, SAE
Colt, everything else is stamp collecting! - cane
"Given ten days for a project, a good engineer spends nine days figuring out how to finish it in one day."
Resistance is not futile.
It's voltage divided by current (R=V/I).
"If you don't know what you're doing, don't do it on a large scale." | |
|
|
| 09-08-2010, 04:06 PM | #6 | Junior Member Join Date: Mar 2010 Location: Raleigh, NC, North Carolina Posts: 4 | M4
Thanks for the info guy's.... I actually talked to Colt directly and the only way it can be done is thru the conversion kits. One day they said, just not right now..... | |
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
|
|
|
