Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Engraving & Refinishing (http://www.firearmstalk.com/forums/f54/)
-   -   surface rust on a matte finish. (http://www.firearmstalk.com/forums/f54/surface-rust-matte-finish-48855/)

drewoufan 09-26-2011 05:30 PM

surface rust on a matte finish.
 
As I said I have surface rust on a matter finish gun. No pitting just surface. But just oil won't take it off. The internals are clean. So how do I get this rust off of the finish without distroying the finish or does it need to be done from scratch? Any advice would be helpfull. Just seems like the matter finish would come off easy with to much abraison. Any ideas? Thanks!

Doc Neeley 09-26-2011 08:41 PM

removing rust
 
I use 0000 steel wool and dribble hoppes #9 on it and gently attack the rust, wiping it from time to time. It works.

Good luck.

drewoufan 09-27-2011 04:53 AM

Thanks a ton Doc!

Marlinman 09-27-2011 06:19 AM

A tooth brush/gun brush w polymer bristles w some 3-n-1 oil works to.


All times are GMT. The time now is 09:01 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.