Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Engraving & Refinishing (http://www.firearmstalk.com/forums/f54/)
-   -   Stainless Steel Touch-Up (http://www.firearmstalk.com/forums/f54/stainless-steel-touch-up-85797/)

starving030 03-05-2013 03:41 AM

Stainless Steel Touch-Up
 
I'm not sure if this is considered refinishing or not but I have a Bauer 25 acp that is stainless steel. I would like to polish it up and/or remove the scratches that have built up over the years. What would be the the preferred method to polish a SS gun?

Side question - Should I clean up the magazine also?

Thanks

BillDeShivs 03-05-2013 04:45 AM

The top, rounded part of the Bauer slide is bead blasted. The slide flats are sanded smooth to about 320 grit. The frame is also around 320 grit. You can use wet/dry autobody sandpaper. Tape the paper to a clean, flat surface and rub the gun on it in the same direction as the existing sanding marks. 400 grit may work well, too.
Unless the magazine has burrs, there is no reason to sand it.

starving030 03-05-2013 11:10 PM

Thanks. I'll give a shot


All times are GMT. The time now is 10:37 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.