Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Engraving & Refinishing (http://www.firearmstalk.com/forums/f54/)
-   -   Show off those refinished guns!! (http://www.firearmstalk.com/forums/f54/show-off-those-refinished-guns-47356/)

SneakyPotato 08-25-2011 06:42 PM

Show off those refinished guns!!
 
Get out your best pics and post em here. Stripped off the blue to antique it? Post it here. Refinished those ugly orange grips or stock? Post it here. Sent it in and got it Turnbulled? Post it here. Before and after pics are appreciated.

:D

TheOldMan 08-31-2011 12:32 PM

I'll bite... I'll have to move the pic's to my computer but I'd enjoy posting some of my work for all to see.

TheOldMan 08-31-2011 12:41 PM

3 Attachment(s)
Here's one to get started with (had the photo's on my work computer)..

Marlin Papoose rifle that was given to me by my Ma-inlaw. Not a whole lot of work needed but clean up and re-blue.

Toll13 08-31-2011 02:02 PM

1 Attachment(s)
I don't have before pics but this bad boy spent 3 weeks under water after Katrina and my dad has been working on it since.

SneakyPotato 09-03-2011 10:23 PM

Great rebluing job! Did you do that yourself?

Sniper03 09-03-2011 10:50 PM

Old Man,

Would you like to share the procedure you used to do the fine job you did on the Barrel? "Great Job!" :)


03

D-Ric902 09-04-2011 07:46 AM

I got one
http://i13.photobucket.com/albums/a2...2/DSCF0633.jpg
Colt Compact before and with idiot scratch

http://i13.photobucket.com/albums/a2...2/IMG_3054.jpg
After Novak sights and Metaloy hard chrome and new thumb safety

http://i13.photobucket.com/albums/a2...2/IMG_3059.jpg
http://i13.photobucket.com/albums/a2...2/IMG_3059.jpg

FROGMAN 09-05-2011 09:00 PM

I've been thinking about making my Desert Eagle a two tone but I'm hesitant because of the upper rails getting to much chrome screwing up the slide.
It's to expensive a gun to not have it working perfectly. Has anyone here tried it & can they post a pic?

TheOldMan 09-06-2011 10:56 AM

Quote:

Originally Posted by Sniper03 (Post 574178)
Old Man,

Would you like to share the procedure you used to do the fine job you did on the Barrel? "Great Job!" :)


03

Sure thing...

This particular rifle was not as bad off as it seemed so I was able to use Oxpho Blue cold blue to restore the finish. The reciever is an alloy so it recieved a few coats of Dura Coat.

For anything more involved, I would use a hot blue. Outside of course since it's very caustic and my shop is not suitable (ventilation).. I've not done any parkerizing yet but that will be next. Most of my work is blueing or DuraCoat.

Axxe55 09-23-2011 11:57 AM

my latest project, stoeger 12ga O/U shotgun
 
4 Attachment(s)
my stoeger 12ga O/U that i refinished the stock and forearm on. i have never been a big fan of high gloss finishes. always liked the hand rubbed oil finishes better.


All times are GMT. The time now is 11:58 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.