Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Engraving & Refinishing (http://www.firearmstalk.com/forums/f54/)
-   -   ruger m77 color? (http://www.firearmstalk.com/forums/f54/ruger-m77-color-11427/)

iowa101st 03-01-2009 08:47 PM

ruger m77 color?
 
Hey everyone,

New to this great site! My Father-in-law has a Ruger M77 with the low-glare stainless finish. We are puting a muzzlebreak on it and would, obviously, like it to match. Having trouble finding a way to match this rare color. Any suggestions?

Thanks!

dclevinger 03-02-2009 05:18 PM

Bead blasting the brake will probably come pretty close to matching. The best way to get it to match perfectly would be to re-bead blast the whole gun with the brake.

David

jeepcreep927 03-23-2009 09:57 PM

Brownells sells oven cure finishes and one of the colors is "stainless steel gray". The description says it's supposed to be a very good match for bead blasted matte stainless guns, hence the name. Might be worth a look, and it's only about $15 a can.

http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=1143&title=AEROSOL%20BAKING%2 0LACQUER

Dura Coat might be another option if you aren't opposed to a coating type finish. Through experience I can tell you the Duracoat is more durable, but a little more involved to apply. Not difficult though. If you call Lauer directly you might get a decent color match right off the bat. They offer MANY colors.

http://www.lauerweaponry.com/


All times are GMT. The time now is 09:44 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.