Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Engraving & Refinishing (
-   -   Remy 1100 gloss finish (

TheOldMan 02-13-2013 05:20 PM

Remy 1100 gloss finish
Although I've done many a restoration/refinishing project, I've yet to do a Remy 1100. What is the best finishing product to use to get the high gloss durable finish that comes on the 1100/870's from the factory?? I'm thinking poly but not 100% on this.

Please advise and thanks in advance...

TheOldMan 02-14-2013 02:32 PM

No advice at all? Cmon guys I know thre are many resto people in here =) BTW if it helps at all, most if not all of the work I'e done on wood has been with hand rubbed finishes not glossy work and this is the reason for my question..

DrumJunkie 02-14-2013 04:50 PM

When I want a high gloss finish I lean to the polyurethane. I'm sure many will disagree with this but I've had excellent results. WhenI have done this I have found sprays are horrible compared to a brush on method.

chuckusaret 02-14-2013 05:15 PM

Yes, I have done a few with polyurethane with excellent results also, but I use a spray gun to apply the finish.

CA357 02-14-2013 05:17 PM

I've been happy with Tru-Oil. Steel wool between coats with a final coat or two of beeswax.

TheOldMan 02-14-2013 06:35 PM

Thanks guys... I've also leaned toward the spraying on of the poly.. I also like the Tru-Oil suggestion. I used that on an A5 Browning and it came out very nice.

CA357 02-14-2013 09:51 PM

Keep us in the loop and remember, we love pikchurs.

Txhillbilly 02-16-2013 05:44 PM

Most of the factory high gloss finishes are sprayed on poly.

All times are GMT. The time now is 02:09 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.