[CNC602]

Did an Engraving on a gun clip (.40 Cal), It was not for me. But I was wondering if the engraving area would affect the way the clip loaded into the gun. Would the marked area cause any damage. I would imagine it might make loading the clip not as smooth.

Wondering if Gun Clip Engraving is something gun enthusiast would want to do.

Were using a Vision Engraving Systems Max Pro Engraver. It's a Rotary Engraver not laser.

Here is a video link below.

YouTube - Gun Clip Engraving on a .40 Cal Gun Clip Using A Vision Engraving Systems Max Pro Engraver

YouTube - Gun Clip Engraving on a .40 Cal Gun Clip Using A Vision Engraving Systems Max Pro Engraver

Some info on the CNC Engraving Machine we used.
Computerized Engraving Machines & CNC Routers by Vision™ - Max Pro Jewelry Engraving Machine & Glass Engraving Machine

[NGIB]

They are called magazines - not clips...

[Dzscubie]

Originally Posted by CNC602

Did an Engraving on a gun clip (.40 Cal), It was not for me. But I was wondering if the engraving area would affect the way the clip loaded into the gun. Would the marked area cause any damage. I would imagine it might make loading the clip not as smooth.

Wondering if Gun Clip Engraving is something gun enthusiast would want to do.

Were using a Vision Engraving Systems Max Pro Engraver. It's a Rotary Engraver not laser.

Here is a video link below.

YouTube - Gun Clip Engraving on a .40 Cal Gun Clip Using A Vision Engraving Systems Max Pro Engraver

Some info on the CNC Engraving Machine we used.
Computerized Engraving Machines & CNC Routers by Vision™ - Max Pro Jewelry Engraving Machine & Glass Engraving Machine

AAARRRRRGGGGGGGGGGGG...... This is the one thing that just really trips my trigger.... It's a MAGAZINE not a "clip" people should not learn to talk about weapons, firearms, guns, bang sticks, gats, boomers (did I miss any?) from the TV.

[canebrake]

Can my clips be engraved?

[BillM]

Originally Posted by Dzscubie

AAARRRRRGGGGGGGGGGGG...... This is the one thing that just really trips my trigger.... It's a MAGAZINE not a "clip" people should not learn to talk about weapons, firearms, guns, bang sticks, gats, boomers (did I miss any?) from the TV.

Well--I suppose it COULD have been a clip.

Genitron.com: Bergmann*1896 Pistol

That's the ONLY clip fed pistol I know of--anybody got another one? There
are a few that use strippers, but that's not really a clip.

Hmm--the OP did say ".40 cal"---so BZZZZZTTT, it's a magazine!

[CNC602]

umm ok... So would this type of CNC engraving using a Vision Engraving Systems rotary type engraver on a magazine affect performance in any way?

[robocop10mm]

Since I have no idea that that tool/machine is I will say that as long as the engraving is not too deep and is not in the area of the feed lips, it should not adversely effect performance or strength of the magazine.